| Author |
Thread: VS2000 Ultra>Auto Roll Processing |
    
Gold Member Username: Kirankumar
Kenya
Post Number: 1692
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 06:09 pm: |
|
Guys,
i just borrowed a friends vs ultra and put in new bin and scanned all channels.
but keeps saying "Auto Roll Processing"
did hard reboot
any suggestions? |
|
|
|
Silver Member Username: Steph_raven
Cartier is my boy toy!...,
U wanna play...
Canada
Post Number: 359
Registered: May-06
|
| Posted on Friday, February 22, 2008 - 06:23 pm: |
|
you are the unluckiest ultra user i know...is it 4 bev or dn?
reports that bin went in like a charm...no hard boot was even needed..but hey that's a minor detail. if it's dn try to leave it roll on channel 300 and for b3v try 408 or 125 |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 166
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 06:38 pm: |
|
Africain for me i resolve this problem on mine. You go in channel scan and created a new dish with same information (sat1 user)and go change in usal put the same (if probleme with echostar 119w) put 119w and blind scan. Notice this is the only thing work for mine and few other |
Gold Member Username: Kirankumar
Kenya
Post Number: 1693
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 06:42 pm: |
|
guys,
all 3 dn rolled in after leaving on 200 but 91 is not |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 169
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 06:45 pm: |
|
Same as me, i dont no why that work but that work just try it |
Gold Member Username: Kirankumar
Kenya
Post Number: 1694
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 06:49 pm: |
|
ok now dn is ok ,but on bev it says "no audio or video" |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 171
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 06:52 pm: |
|
Now delete new satellite and check Bev setup |
Gold Member Username: Kirankumar
Kenya
Post Number: 1697
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 06:54 pm: |
|
i don't understand delete |
New member Username: Zigziga
Post Number: 8
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 06:56 pm: |
|
African, try chan 2218 or 2510 leave for about 10 mins should do it it work for my boy |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 175
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 06:57 pm: |
|
In channel scan del the new sat1user |
New member Username: Zigziga
Post Number: 10
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 06:57 pm: |
|
try to leave it on ch 2218 or 2510 for about 10 mins work for my boy |
Gold Member Username: Kirankumar
Kenya
Post Number: 1698
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 06:58 pm: |
|
thanks ill try that
i have never had bev or vs ultra,so this info is pretty good thanks guys |
Gold Member Username: Saqeeb9000
Post Number: 2460
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 06:59 pm: |
|
so african did u got 91 or 82 dish..? |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 177
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 07:05 pm: |
|
I search 2 weeks this problem and by hasard resolved my problem. Viewsat need to hard boot frequently and before put new bin(important) |
Gold Member Username: Kirankumar
Kenya
Post Number: 1699
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 07:06 pm: |
|
Sada,
i got a 6 ft pole from home depot and a bag of concrete then i put the pole in a 5 gallon bucket and poured concrete and leveled the pole.
on the dish i have marked elevation for 91 and 82 and on the ground i have marked position for 91 and 82,so when cricket is on 82 otherwise 91
it was all working fine on c00lsat yesterday but now on vs ultra it keeps saying no audio video |
Gold Member Username: Saqeeb9000
Post Number: 2461
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 07:07 pm: |
|
ok |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 178
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 07:10 pm: |
|
You may fit a motor HH-90 on and change without go outside |
Gold Member Username: Kirankumar
Kenya
Post Number: 1700
Registered: Oct-07
|
| Posted on Friday, February 22, 2008 - 07:18 pm: |
|
on a small dish like mine |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 181
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 07:33 pm: |
|
Yes i have 1 20 inch with hh-90, just need to fabricated 2 plate with 4 holes each for distance small dish and motor |
Silver Member Username: Plymouth
Quebec city,
Quebec
Canada
Post Number: 182
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 07:40 pm: |
|
Africain your viewsat is ok now |
Silver Member Username: Steph_raven
Cartier is my boy toy!...,
U wanna play...
Canada
Post Number: 360
Registered: May-06
|
| Posted on Friday, February 22, 2008 - 08:33 pm: |
|
if it says no audio/video..your autoroll for bev is off...maybe?? |
