| Author |
Thread: How to fix that? |
    
Silver Member Username: Desi_munda
Post Number: 114
Registered: Nov-07
|
| Posted on Wednesday, February 20, 2008 - 07:32 pm: |
|
sorry for new thread,
i have flu to pansat converted, each time i put new bin, i have to do first Blind scan and after Satellite scan, it take much time, i want to know how to fix this problem, (i mean) i dont want to blind scan and satelite scan. i want when i put new file, it should work without scan.
i have one friend, he have the same receiver like me, flu to pansat converted. when he put the new file in, he can watch whitout scanning.
is there anybody who can tell me about this please?? |
|
|
|
Gold Member Username: Nydas
Post Number: 8331
Registered: Jun-06
|
| Posted on Wednesday, February 20, 2008 - 09:19 pm: |
|
You can use Channel Master. Download it from
http://www.sharpc.com
It has good instructions. The main thin you have to know is thta although you have a Pansat 2500 converted, in the eyes of CM you have a Pansat 2700 or 3500 in the software. You still use the Straight RS232 cable. |
Silver Member Username: Desi_munda
Post Number: 117
Registered: Nov-07
|
| Posted on Thursday, February 21, 2008 - 08:31 am: |
|
even if i use channel master, i have to do blind scan first.
but i have one friend, he have same receiver like me, but when he load a bin file, he dont need to do blind scan. he get the image right after loading the file.
i want to know,maybe i have to convert again my flu with another file.
what u think? |
Silver Member Username: Ong_tu
Post Number: 209
Registered: Jun-06
|
| Posted on Thursday, February 21, 2008 - 08:48 am: |
|
I would like to invite you over to a great site that never asks for donations .
We have every download you will ever need "music,computer programs", and FTA files) if you need help my nick is tup14. Hope you like it "Tup"
http://www.all-gadgets.net/forums/index.php: mmph: |
Silver Member Username: Desi_munda
Post Number: 118
Registered: Nov-07
|
| Posted on Thursday, February 21, 2008 - 08:53 am: |
|
sorr but i need the answer for that problem,
even if i use channel master, i have to do blind scan first.
but i have one friend, he have same receiver like me, but when he load a bin file, he dont need to do blind scan. he get the image right after loading the file.
i want to know,maybe i have to convert again my flu with another file.
what u think? |
Gold Member Username: Nydas
Post Number: 8335
Registered: Jun-06
|
| Posted on Thursday, February 21, 2008 - 10:24 am: |
|
Hussain:
1. You do a blind scan on a working BIN.
2. Take it to you computer and under CM doa read from STB.
3. Look at all the details, remove the channels you don't want, set up Parental controls, do rename, etc. all in the comfort of your computer and its editing powers.
4. You write back to you STB and watch TV.
You do all above once only every 3-4 months, unless there has been a drastic change in the TPs.
**--
When a new BIN comnes out,
1. you take the receiver to your computer.
2. Save the current Channel list with any minor changes you have made during watching.
3. Load the new BIN.
4. Load the saved channel list into your receiver.
5. Connect to TV and watch.
The above is as detailed as anybody would go. You should be able to figure it out yourself BY USING IT |
Silver Member Username: Dimwitt
Post Number: 427
Registered: Aug-06
|
| Posted on Thursday, February 21, 2008 - 12:31 pm: |
|
next time you load bin--wait until the receiver displays a channel number -- then start the download. |
Silver Member Username: Desi_munda
Post Number: 119
Registered: Nov-07
|
| Posted on Thursday, February 21, 2008 - 06:27 pm: |
|
ok thanks for that,
but how come my friend receiver just need to load a new bin and we can watch rightway without using CM or scanning?
maybe i should reconvert my flu to pansat and put another file, because there are two different files for conversion. one is j27_205_1 and the second is j27_205_1.
what u think about that? |
Gold Member Username: Nydas
Post Number: 8364
Registered: Jun-06
|
| Posted on Thursday, February 21, 2008 - 09:23 pm: |
|
j27_205_1.bin was the first one recommended by jvvh. He later said to use
jvvh_208_2500to2700.bin for conversion.
I am only going by his recommendations. |
Silver Member Username: Desi_munda
Post Number: 124
Registered: Nov-07
|
| Posted on Thursday, February 21, 2008 - 09:32 pm: |
|
ok thanks |
Silver Member Username: Dannienjulie
Post Number: 152
Registered: Jul-07
|
| Posted on Friday, February 22, 2008 - 12:34 am: |
|
do i have to make a cable to jtag plz help |
Silver Member Username: Metallica
Post Number: 158
Registered: Jan-08
|
| Posted on Friday, February 22, 2008 - 02:40 am: |
|
LOL...Jtag what? more infor please. |
Bronze Member Username: Perycles2005
Post Number: 66
Registered: Mar-05
|
| Posted on Friday, February 22, 2008 - 02:56 am: |
|
you don't need to Jtag if you use that method...good luck |
