| Author |
Thread: How to save channels? |
    
Bronze Member Username: Suketu90
Toronto,
Ontario
Canada
Post Number: 20
Registered: Sep-06
|
| Posted on Saturday, January 26, 2008 - 08:14 pm: |
|
How do i save channels on my pansat 2700 converted? so that i don't have to rescan everytime? |
|
|
|
Silver Member Username: Shadow45
Mty,
Nuevo Leon
Mexico
Post Number: 253
Registered: Aug-07
|
| Posted on Saturday, January 26, 2008 - 08:25 pm: |
|
Credit goes to JAVY_GARZA from the hispanic thread....
He posted a very easy way to DL your channel list to the pc..(in my case ,i have a lava3200 converted to pansat2700)
1. do a blind scan so u get all the channels
2. edit the channels..(what i did was erase all the crap i dont watch,need)and make sure the settings for your sats are correct.
3.plug the straight Fm to Fm db9 cable to your STB
4. open the X-87 27.02 loader and on "file type" select the "channel data file" option
5. with the receiver turned on and plugged in to the pc, click the already enabled "uupload" button
6. wait for it to say "complete" and save the channel list in the folder you want
to download it back to the stb once a new bin is loaded just reopen the X-87 loader.. wait for the stb to reboot and when it gets to the screen where it says "english" and hit "download"...again wait for it to say "complete" and there u go the channels and settings will be available from the start w/o needing to do a scan again.
hope it helps. |
Gold Member Username: Runnerguy
Pluto
Post Number: 1127
Registered: Sep-06
|
| Posted on Saturday, January 26, 2008 - 08:27 pm: |
|
http://www.satelliteguys.us/free-air-fta-discussion/41202-pansat-2700a-gtool-cha nnel-editor.html |
Bronze Member Username: Polo69
Post Number: 32
Registered: Dec-06
|
| Posted on Sunday, January 27, 2008 - 11:40 am: |
|
where i can find the X-87 27.02 loader
thanks for your help |
Silver Member Username: Vittu
Post Number: 128
Registered: Oct-07
|
| Posted on Monday, January 28, 2008 - 05:19 pm: |
|
I have seen some receivers where I do not have to reload the channel files. Channels stays there permanently. Where else on some receivers I have to setup the sats and blind scan manually. How so? I m talking about pansat/FLU converted to 2700. |
Silver Member Username: Vittu
Post Number: 129
Registered: Oct-07
|
| Posted on Monday, January 28, 2008 - 05:20 pm: |
|
Is it because I am using channel master to read/write and not Blacklist loader?? |
Bronze Member Username: Khopdi
Post Number: 84
Registered: Apr-07
|
| Posted on Monday, January 28, 2008 - 07:04 pm: |
|
Allow STB to fully boot and display a channel before download new bin. Just wait after turning on via backswitch till the receiver displays a channel number then start the download. After download the receiver will reboot to a channel and not the language screen. |
Silver Member Username: Vittu
Post Number: 134
Registered: Oct-07
|
| Posted on Monday, January 28, 2008 - 07:15 pm: |
|
thanks Khopdi. Is this nick taken from "Nukkad"  |
Bronze Member Username: Polo69
Post Number: 33
Registered: Dec-06
|
| Posted on Monday, January 28, 2008 - 07:43 pm: |
|
khopdi
which loader are you using?
thanks |
Bronze Member Username: Khopdi
Post Number: 85
Registered: Apr-07
|
| Posted on Monday, January 28, 2008 - 07:53 pm: |
|
X-05BL Loader v35 for PanSat 3500SD |
New member Username: Famf555
Post Number: 6
Registered: Nov-07
|
| Posted on Monday, January 28, 2008 - 08:00 pm: |
|
I'm going to use Shadow45's method. Everytime I use channel master, it errors out at the end and will not read whats on the converted pansat 2700. It used to read it but not anymore. |
New member Username: Rockman169
Canada
Post Number: 8
Registered: Nov-06
|
| Posted on Tuesday, January 29, 2008 - 06:48 am: |
|
--------------------------------------------------------------------------------
where i can find the X-87 27.02 loader
thanks for your help |
