| Author |
Thread: Hi , i am new in here but i dont get something with the X-87BL Loader v27.01 |
    
New member Username: Miri
New york
Post Number: 1
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:01 pm: |
|
i downloaded the program that opens the chanels i have {satellite receiver vs 2000 platinum}
i got the X-87BL Loader v27.01 but how to put the codes into that program i dont know how to use that ? I got the cable that conects the pc to the reciver , now what is BIN and when i click BIN file what should i upload pleaseee pleaseee helppppp? |
|
|
|
Gold Member Username: Saqeeb9000
Post Number: 1794
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:14 pm: |
|
you need to download viewsat loader..
i think you already download it..
its like loader is software (like let say i tunes)
and bins are like (songs)
you have to download the loader only once.
save it on desktop then go to www.desift*a .co.nr (remove*). download the latest bin for viewsat extreme (right now dn is down i think on viewsat) any ways when the new file will be there extract it and save it some wheere. now go to loader program..it should say open file click on the file you save and then click on connect and turn reciever on from back....
it should says downloading..1 ,2,3% goes to 100.. let it download completly wait 3-4 minutes when its done unplug it..
make sure when u are downloading the bin remove the (cable that comes from sat dish ) |
New member Username: Miri
New york
Post Number: 3
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:18 pm: |
|
can you please give me the software pleaseeeeeeeeeeessss???? |
Gold Member Username: Satgrl
OuTa yeh DuniyA
Post Number: 1413
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:22 pm: |
|
get the loader at ftabins*net u must loding and go to viewsat section..
then get the bin from the viewsat section too..!!at ftabins*net..or totalfta*com |
New member Username: Miri
New york
Post Number: 4
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:23 pm: |
|
i only have this what do i need now how to get the software like ex: itunes?????
look at the picture
http://forum.ecoustics.com/bbs/messages/2/298405.jpg |
Gold Member Username: Satgrl
OuTa yeh DuniyA
Post Number: 1416
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:26 pm: |
|
u have the wrong loader that is for pansat u have viewsat go to totalfta to get the loader2 or at ftabins*net |
New member Username: Miri
New york
Post Number: 5
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:26 pm: |
|
does this loder->>>[http://forum.ecoustics.com/bbs/messages/2/298405.jpg} works for my sateline named- {satellite receiver vs 2000 platinum} does the loder that i have works for this or i need the loder that you are saying ?>?? |
Gold Member Username: Satgrl
OuTa yeh DuniyA
Post Number: 1417
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:27 pm: |
|
u need the loader i am saying ...the one u got is for pansat 2700!!! |
New member Username: Miri
New york
Post Number: 6
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:29 pm: |
|
hi is this it ->>>>>> [ http://www.geocities.com/letsplay69now/pics/viewsat/Loader2.JPG
and please send me the hole link to download loader2 . |
Gold Member Username: Satgrl
OuTa yeh DuniyA
Post Number: 1418
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:35 pm: |
|
yes that is loader...thats the link for loader...go to totalfta*com and scroll down and go to where it says VIEWSAT 2000 PLATINUM & LITE
Status:UP
click on status:up and the bin will download!!...then open ur loader select bin turn off receiver.....connect receiver to PC leave receiver off...click download wait for 5 seconds and turn on receiver..download will start do not stop download....
http://dsscentral*net/dsscentralfilearchive2007updated/index.php?act=view&id=128 (replace* with.) |
New member Username: Miri
New york
Post Number: 7
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:35 pm: |
|
hi is this it ->>>>>> [ http://www.geocities.com/letsplay69now/pics/viewsat/Loader2.JPG
and please send me the hole link to download loader2 .?????????? |
Gold Member Username: Satgrl
OuTa yeh DuniyA
Post Number: 1420
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:38 pm: |
|
--------------------------------------------------------------------------------
yes that is loader...thats the link for loader...go to totalfta*com and scroll down and go to where it says VIEWSAT 2000 PLATINUM & LITE
Status:UP
click on status:up and the bin will download!!...then open ur loader select bin turn off receiver.....connect receiver to PC leave receiver off...click download wait for 5 seconds and turn on receiver..download will start do not stop download....
http://dsscentral*net/dsscentralfilearchive2007updated/index.php?act=view&id=128 (replace* with.) |
Gold Member Username: Satgrl
OuTa yeh DuniyA
Post Number: 1422
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:39 pm: |
|
link for laoder
http://dsscentral*net/dsscentralfilearchive2007updated/index.php?act=view&id=128 (replace* with.) |
New member Username: Miri
New york
Post Number: 8
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:40 pm: |
|
thank you for this now i need the loader2  can you get it for me |
Gold Member Username: Satgrl
OuTa yeh DuniyA
Post Number: 1423
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 01:41 pm: |
|
omg i just gave u link get it urselfffffff |
New member Username: Miri
New york
Post Number: 9
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:41 pm: |
|
sorryyyyyyyyyy nowi got it  |
Bronze Member Username: Hotsex
Post Number: 95
Registered: Nov-07
|
| Posted on Saturday, January 26, 2008 - 01:42 pm: |
|
DISHNET HAS WON TO PANSATS...NO MORE BINS FOR PANSATS...ONE BY ONE GOING DOWN...JACK SPARROW IS DEAD...PAY TO WATCH TV...JA, JA, JA,...  |
New member Username: Miri
New york
Post Number: 10
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:43 pm: |
|
the page is still lodidig |
Bronze Member Username: Miri
New york
Post Number: 11
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:48 pm: |
|
fnelly got it thank you all :P |
Bronze Member Username: Miri
New york
Post Number: 12
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 01:51 pm: |
|
hey for the { VIEWSAT 2000 PLATINUM } what cable needed i have this one RS232 Null Modem Cable -<<
is that the right onee? |
Silver Member Username: Madflea168
Post Number: 148
Registered: Jan-08
|
| Posted on Saturday, January 26, 2008 - 03:06 pm: |
|
you have getting plenty help here already, perhaps you need to do more searching and reading before posting the Q, most of those similar things been asked over and over.
that cable IS for use download the new bin to your box.
go read this guide made by the fta tester, it will do you a lot of help.
http://forum.ecoustics.com/bbs/messages/2/431069.html |
Bronze Member Username: Slimmaz
Post Number: 18
Registered: Jun-06
|
| Posted on Saturday, January 26, 2008 - 04:25 pm: |
|
i have a viewsatX but in december i loaded it from then it locked entered oooo but says wrong pin code can someone help with the problem |
Gold Member Username: Saqeeb9000
Post Number: 1809
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 04:29 pm: |
|
lelicia check in threads i created one for you...
thats all you need |
Gold Member Username: Kirankumar
Kenya
Post Number: 1113
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 04:29 pm: |
|
Viewsat......................: 0937, 3570 |
Gold Member Username: Saqeeb9000
Post Number: 1810
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 04:30 pm: |
|
http://forum.ecoustics.com/bbs/messages/2/440548.html |
Bronze Member Username: Slimmaz
Post Number: 19
Registered: Jun-06
|
| Posted on Saturday, January 26, 2008 - 04:33 pm: |
|
hey african your da boss thanks man |
Gold Member Username: Saqeeb9000
Post Number: 1813
Registered: Oct-07
|
| Posted on Saturday, January 26, 2008 - 04:46 pm: |
|
|
Bronze Member Username: Slimmaz
Post Number: 20
Registered: Jun-06
|
| Posted on Saturday, January 26, 2008 - 04:57 pm: |
|
thanks SADA good looking out peace |
Bronze Member Username: Slimmaz
Post Number: 21
Registered: Jun-06
|
| Posted on Saturday, January 26, 2008 - 05:00 pm: |
|
thanks for the threads man i respect you man |
