| Author |
Thread: No Channels |
    
New member Username: Lemonman
Post Number: 4
Registered: Aug-07
|
| Posted on Wednesday, January 02, 2008 - 12:21 am: |
|
i did a factory reset on my ariza 700 and now when i scan for chanells i am not getting anything. plz help! |
|
|
|
Gold Member Username: Donnie1973
Post Number: 2548
Registered: May-06
|
| Posted on Wednesday, January 02, 2008 - 12:37 am: |
|
u lost ur ant settings. If u want DN 119 and 110 do this if u have a dish pro lnb (no disecq switch)
lnb type- dishpro
disecq 119=1
disecq 110=2 |
Silver Member Username: Kirankumar
Kenya
Post Number: 580
Registered: Oct-07
|
| Posted on Wednesday, January 02, 2008 - 12:46 am: |
|
Guys,
we were trying to help this thing,but it turns out it is a F#cking guy.posing as a fudi
Ghazala Go Screw yourself,whoever you F@cking are,and don't bother ask for any help.khote |
New member Username: Lemonman
Post Number: 5
Registered: Aug-07
|
| Posted on Wednesday, January 02, 2008 - 12:49 am: |
|
still isnt working. im not getting any quality on any tp. |
Silver Member Username: Kirankumar
Kenya
Post Number: 591
Registered: Oct-07
|
| Posted on Wednesday, January 02, 2008 - 12:57 am: |
|
Guys,
we were trying to help this thing,but it turns out it is a F#cking guy.posing as a fudi
Ghazala Go Screw yourself,whoever you F@cking are,and don't bother ask for any help.khote |
Gold Member Username: Donnie1973
Post Number: 2552
Registered: May-06
|
| Posted on Wednesday, January 02, 2008 - 12:59 am: |
|
its cause u dont have ur ant settngs correct. if u know how to check signal on a tp, then u should be able to set up the ant settings. Good luck |
New member Username: Lemonman
Post Number: 6
Registered: Aug-07
|
| Posted on Wednesday, January 02, 2008 - 01:09 am: |
|
for 119W the level is 28% and 0% quality. so if there is a way to get some quality i should find channels. only problem is i don't know how |
Gold Member Username: Tapeman
New York City in-HD,
NY
Post Number: 1992
Registered: Oct-06
|
| Posted on Wednesday, January 02, 2008 - 01:18 am: |
|
Lemonman
Yo have a great question
There is nothing wrong with your receiver
But the answer is
In new ECM
They took away hardware signal level and quality
All I can tell yo
Wait for new bin
Don't mess with your settings |
Gold Member Username: Ke5aqn
IF I DONT KNOW THE ANSWER,
I WILL FIND...
Post Number: 2856
Registered: Sep-06
|
| Posted on Wednesday, January 02, 2008 - 01:50 am: |
|
Lemonman,
please ignore King and African.
We need to know your set up in order to help you further. What is your lnb, switchs, antenna, receivers, everything connected to your receiver.
You have a setting problem someware with al your setup info we will be able to help you.. |
New member Username: Lemonman
Post Number: 8
Registered: Aug-07
|
| Posted on Wednesday, January 02, 2008 - 04:34 pm: |
|
its ariza
satelite is echo 7 (119W)
lnb power is on
lnb type is standard
lnb local frequency is 11250
22kHz is off
Dieseqc is off
legeacy SW is none
Positioner setting is disabled
and still the level is only 39%
i always did it like this and it always worked but now for some reason it isnt |
