| Author |
Thread: Taking the time to |
    
Bronze Member Username: Poopoohed
Post Number: 54
Registered: Jul-06
|
| Posted on Monday, December 31, 2007 - 04:35 pm: |
|
i thought i'd take this down time to move my dish ..long story short i'm now getting 97% on bird 119 but only 67% on 110 .
played with it most of the day so real answers only plz |
|
|
|
New member Username: Jgrumby
Post Number: 1
Registered: Dec-07
|
| Posted on Monday, December 31, 2007 - 04:54 pm: |
|
Did you try peaking the dish on 110 as opposed to 119?
Also, are you sure there are no obstructions in the line of sight since you moved the dish? |
Bronze Member Username: Poopoohed
Post Number: 55
Registered: Jul-06
|
| Posted on Monday, December 31, 2007 - 06:30 pm: |
|
yea i peaked the 110 by moving the dish but it makes the 119 go offline as far as the field of view is better at this location |
Bronze Member Username: Carpie
Post Number: 31
Registered: Dec-07
|
| Posted on Monday, December 31, 2007 - 08:51 pm: |
|
Try moving your house. |
Bronze Member Username: Poopoohed
Post Number: 56
Registered: Jul-06
|
| Posted on Tuesday, January 01, 2008 - 11:19 am: |
|
yea thanx fishman that helps since moving my house i can see into your mommas bedroom window alot better FOOL! |
Silver Member Username: Razzorwyre
Post Number: 119
Registered: Dec-07
|
| Posted on Tuesday, January 01, 2008 - 11:26 am: |
|
When I set my dish I used the cals from Dishpointer that combined 110 and 119 and it got it at about 97% on both dishes. This may help instead of lining one at a time. |
New member Username: Jgrumby
Post Number: 3
Registered: Dec-07
|
| Posted on Tuesday, January 01, 2008 - 12:01 pm: |
|
If you were getting good quality on both sats before you moved the dish, your mounting pole might not be plumb. Make sure your bracket is not slightly tilted in one direction or the other. You also might be able to make up the difference by adjusting the dish skew if it is off a bit. |
Bronze Member Username: Poopoohed
Post Number: 57
Registered: Jul-06
|
| Posted on Tuesday, January 01, 2008 - 05:56 pm: |
|
ill ttry both sugests thnx raz & grum |
|
