| Author |
Thread: Pansat 2700a Not Working |
    
New member Username: Borikengirl
Post Number: 1
Registered: Nov-07
|
| Posted on Friday, November 02, 2007 - 10:02 am: |
|
After downloading the new file all i get is "No Signal"
On Antenna Setup...Level 99% but Quality 0....on Echo 119 and Echo 110
Please help.... |
|
|
|
Silver Member Username: Dr_dss
Post Number: 220
Registered: Sep-07
|
| Posted on Friday, November 02, 2007 - 10:08 am: |
|
Go into Antenna Setup reconfigure you switch port information. |
New member Username: Borikengirl
Post Number: 2
Registered: Nov-07
|
| Posted on Friday, November 02, 2007 - 10:19 am: |
|
I'm sorry I am completly new @ all this...
I don't see that on Antenna Setup... |
Silver Member Username: Dr_dss
Post Number: 225
Registered: Sep-07
|
| Posted on Friday, November 02, 2007 - 10:25 am: |
|
goto menu/ installation/ Antenna then check diseqc settings on 110 119 |
New member Username: Borikengirl
Post Number: 3
Registered: Nov-07
|
| Posted on Friday, November 02, 2007 - 10:41 am: |
|
Tried Diseqc 1..2..3..4 and nothing changes...
Thank you very much for your help.... |
Silver Member Username: Rtap
FL
Post Number: 860
Registered: Jan-07
|
| Posted on Friday, November 02, 2007 - 10:45 am: |
|
oye borikual what dish are you using. |
New member Username: Borikengirl
Post Number: 4
Registered: Nov-07
|
| Posted on Friday, November 02, 2007 - 10:52 am: |
|
Dish 500 |
Silver Member Username: Rtap
FL
Post Number: 864
Registered: Jan-07
|
| Posted on Friday, November 02, 2007 - 10:55 am: |
|
does it look like this.
 |
New member Username: Borikengirl
Post Number: 5
Registered: Nov-07
|
| Posted on Friday, November 02, 2007 - 11:01 am: |
|
Well I can see the antenna and it says Dish 500...other than that....I don't know... |
Bronze Member Username: Laurad
Post Number: 37
Registered: Aug-07
|
| Posted on Friday, November 02, 2007 - 11:32 am: |
|
Help. I have successfully changed my 2500A to 2700. I loaded the jvv218 bin, I put keys in manually with key-code on DN off BV off and GLOBAL off. I have Echo 11 and 119 along with Nimq(1)(91 levels are 79% quality 90%. checked Antena settings DisEqu is #2.I still keep getting channels going to percent 350 and above. I still have no picture except info channel and cannot find my Echo anything..Please Advise LauraD did not kill (2nd) Pansat |
New member Username: Borikengirl
Post Number: 10
Registered: Nov-07
|
| Posted on Friday, November 02, 2007 - 04:29 pm: |
|
Pansat is still showing "No Signal"
I have dish 500...
Echo 119 is on LNB Type..........Dish Pro
LNB LOcal FReq... 11250
22khz .......... Off
Diseqc............#1
Legacy SW ....... None
Skew ............ 45
TP .......... (17) 12457 V 20.000
POsitiones Setting ....Disable
Satellite Scan .... All
Level ......... 99%
Quality......... 0% |
