| Author |
Thread: Archive through October 26, 2007 |
    
Gold Member Username: Asharfi
Post Number: 1115
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 03:31 pm: |
|
www.future-fta.info |
|
|
|
Bronze Member Username: Afghanprince
Toronto
Post Number: 13
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 03:36 pm: |
|
Hi guys. i have been readin n readin for a good while yet i can't solve the issues im havin with my fortec. so here it goes:
im tryina convert my flu to pansat 2700 and im followin AV's post and his downloads. when i download the boot file b75_m.bin, after it's completed, the B 7 5 doesn't flash on my receiver like its supposed to, instead i see a dash goin across back and forth on the screen/panel. i have 4 different loaders and when i try to download the flash bin file (jvvh_208_1.bin) via the loaders, some say failed and the ones dat do download is useless cuz i styll see the dash goin across my reciever's screen.
any help would be greatly appreciated
rahmeen |
New member Username: Boling
Post Number: 3
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 03:43 pm: |
|
Will downloading the new BIN file will correct my PPV channales and Sports? All of sudden there all gone except for Fox.... what happend?
Pansat 3500
Pansat 2700a |
New member Username: Thaxxx
Post Number: 1
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 03:45 pm: |
|
!!! ESPN and other stations are back on Dish now !!! Finally, with no new bins, too. The calm before the Black Sunday? |
New member Username: Sharaz
Post Number: 5
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 03:54 pm: |
|
Nalin,
I have SonicSat, is it the clone of Sonicview 4000. Where can I find the BIN file for this, appreciate your help.
Thanks a lot. |
Gold Member Username: Asharfi
Post Number: 1122
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 03:57 pm: |
|
All converted FLUs as well as all converted Pansat 2500 receivers are up with Jvvh's bin 218. |
New member Username: Boling
Post Number: 5
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 04:01 pm: |
|
Where can I find Jwh's bin 218? |
Bronze Member Username: Kamranca
Post Number: 60
Registered: Oct-06
|
| Posted on Friday, October 26, 2007 - 04:04 pm: |
|
AV and what about Pansat 2700 Clone receiver..
Is any bin file for this..
Thanks |
Gold Member Username: Nydas
Post Number: 4282
Registered: Jun-06
|
| Posted on Friday, October 26, 2007 - 04:06 pm: |
|
Shariq Raza: To the best of my knowledge, the SonicSat, is it the clone of C00LSAT 4000.
Generally the C00LSAT 4000 BINs are not clone safe, but usually there is a clone safe BIN out within a couple of days. |
Gold Member Username: Asharfi
Post Number: 1130
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 04:23 pm: |
|
Kamran,
For Pansat 2700 CLONE receivers, there's already a fix out as of yesterday. |
Bronze Member Username: Afghanprince
Toronto
Post Number: 15
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 04:24 pm: |
|
im tryina convert my flu to pansat 2700 and im followin AV's post and his downloads. when i download the boot file b75_m.bin, after it's completed, the B 7 5 doesn't flash on my receiver like its supposed to, instead i see a dash goin across back and forth on the screen/panel. i have 4 different loaders and when i try to download the flash bin file (jvvh_208_1.bin) via the loaders, some say failed and the ones dat do download is useless cuz i styll see the dash goin across my reciever's screen. |
Bronze Member Username: Kamranca
Post Number: 61
Registered: Oct-06
|
| Posted on Friday, October 26, 2007 - 04:26 pm: |
|
AV please let me know the exact BIN FILE name,download,location or URL and which loader should i use..
Thanks.. |
Gold Member Username: Asharfi
Post Number: 1132
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 04:27 pm: |
|
Nalin Nyda,
You have FLU or Pansat 2500, right? They are all up, indian channels are working, too. Jvvh released bin 218 some minutes ago. I've tested the bin and it's working fine. So, now you can download it, if you want.  |
New member Username: Boling
Post Number: 6
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 04:32 pm: |
|
AV please let me know the exact BIN FILE name,download location which loader should i use for PANSAT 2700A and 3500, none of the units are clone. |
New member Username: Mann1234
Post Number: 3
Registered: Jul-07
|
| Posted on Friday, October 26, 2007 - 04:42 pm: |
|
hi every one
i need your help plz zzzzzzzzzz
i have a ariza700 i can see my programs but no ppv or any sport is coming on or any desi chanels my box was working fine but i can see only regular programs now no more ppv movies plz help me wat to do to watch my ppv?}} |
New member Username: Mann1234
Post Number: 4
Registered: Jul-07
|
| Posted on Friday, October 26, 2007 - 04:51 pm: |
|
Where can I find bin files for ariza700? |
Bronze Member Username: Jigga19
Post Number: 39
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 04:54 pm: |
|
AV where can i get the file that you used and worked.. |
Silver Member Username: Satgrl
Post Number: 293
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 04:56 pm: |
|
ftabin*net |
Bronze Member Username: Huremkic
Post Number: 12
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 04:58 pm: |
|
hi guys, what is latest loader for converted pansat 2500 to 2700 I know bin file is jvvh218 , and what is latest loader and bin file for pantec multistar ultra |
Silver Member Username: Pathfinder191
Post Number: 205
Registered: Mar-06
|
| Posted on Friday, October 26, 2007 - 04:59 pm: |
|
Picture is freezing very frequently in my SV1000 with new bin SV1000_V0268P. Any opinion please?
Thanks. |
Bronze Member Username: Maro
Post Number: 32
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:02 pm: |
|
hey guys please help me i put a bin in my receiver and now when i try to open it from the back it doesn t want to open i fear that its burn help me plz
thx |
Bronze Member Username: Jigga19
Post Number: 40
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:02 pm: |
|
but there it says it did not work.. |
New member Username: Xxxyyy
Post Number: 1
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:02 pm: |
|
HI EVERYONE,
PLEASE I NEED HELP, I HAVE A LIFE TIME ULTRA, WHAT CAN I DOO ....BECAUSE IT DOESNT WORK....
DID I HAVE TO FOLLOW THIS STEPS :
http://forum.ecoustics.com/bbs/messages/2/389206.html
ps: SORRY 4 MY ENGLISH ! |
Bronze Member Username: Maro
Post Number: 33
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:05 pm: |
|
no they did not say it not work |
Bronze Member Username: Huremkic
Post Number: 13
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:07 pm: |
|
guys, what is latest loader for converted pansat 2500 to 2700 I know bin file is jvvh218 , and what is latest loader and bin file for pantec multistar ultra |
New member Username: Boling
Post Number: 7
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:08 pm: |
|
PLEASE let me know the exact BIN FILE name,download location which loader should i use for PANSAT 2700A and 3500, none of the units are clone.} |
New member Username: Xxxyyy
Post Number: 2
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:09 pm: |
|
MARWAN.....PLZ HELP ME |
Bronze Member Username: Maro
Post Number: 34
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:09 pm: |
|
hey guys come on help me i dont know waht to do i downloaded this file http://www.hostclip.com/dl/089d794fd8126c4a78e22181b13bac2f and then it dont want to open from the back |
Bronze Member Username: Jigga19
Post Number: 42
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:09 pm: |
|
the bin jvvh 18 is it safe to upload anyone?? |
Bronze Member Username: Maro
Post Number: 35
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:12 pm: |
|
hey SOMETHING its right you have to follow the steps hear: http://forum.ecoustics.com/bbs/messages/2/389206.html if you have a fortec star life time ultra or a pansat 2500a |
Bronze Member Username: Maro
Post Number: 36
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:13 pm: |
|
hey SOMETHING its right you have to follow the steps hear: http://forum.ecoustics.com/bbs/messages/2/389206.html if you have a fortec star life time ultra or a pansat 2500a |
Bronze Member Username: Maro
Post Number: 37
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:14 pm: |
|
sorry for the twince send |
Bronze Member Username: Maro
Post Number: 38
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:15 pm: |
|
hey guys come on help me i dont know waht to do i downloaded this file http://www.hostclip.com/dl/089d794fd8126c4a78e22181b13bac2f and then it dont want to open from the back |
Bronze Member Username: Jigga19
Post Number: 43
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:16 pm: |
|
should i just upload the bin... or do all the steps again...from the beginin.. |
New member Username: Xxxyyy
Post Number: 3
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:16 pm: |
|
Thank u Marwan ;)
DID IT WORKS FOR ALL WHO HAD LIFE TIME ULTRA ?
AND MY LAST QUESTION, WHERE CAN I FIND THE NEW CODE AFTER DOING ALL THIS ? |
Bronze Member Username: Jigga19
Post Number: 44
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:18 pm: |
|
i have a question should i just upload the bin or do all the steps again..as in upload j27 bin first |
New member Username: Boling
Post Number: 8
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:19 pm: |
|
PLEASE let me know the exact BIN FILE name,download location which loader should i use for PANSAT 2700A and 3500, none of the units are clone.} |
Bronze Member Username: Jigga19
Post Number: 45
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:20 pm: |
|
i have a question should i just upload the bin or do all the steps again..as in upload j27 bin first..can someone answer this please im waiting to upload the new bin.. |
New member Username: Xxxyyy
Post Number: 4
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:25 pm: |
|
PLZZZZZZZ DID THIS STEPS
http://forum.ecoustics.com/bbs/messages/2/389206.html
WORK OR NOT AND WHERE CAN I FIND THE NEW CODE ??????????????? |
Bronze Member Username: Jigga19
Post Number: 46
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:28 pm: |
|
can someone answer my qyestion please. should i just upload the bin or do all the steps again..as in upload j27 bin first..can someone answer this please im waiting to upload the new bin.. |
New member Username: Xxxyyy
Post Number: 5
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:29 pm: |
|
PLZZZZZZZ DID THIS STEPS
http://forum.ecoustics.com/bbs/messages/2/389206.html
WORK OR NOT AND WHERE CAN I FIND THE NEW CODE ??????????????? |
New member Username: Boling
Post Number: 9
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:29 pm: |
|
--------------------------------------------------------------------------------
PLEASE let me know the exact BIN FILE name,download location which loader should i use for PANSAT 2700A and 3500, none of the units are clone.} |
Bronze Member Username: Huremkic
Post Number: 14
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:30 pm: |
|
}}guys, what is latest loader for converted pansat 2500 to 2700 I know bin file is jvvh218 , and what is latest loader and bin file for pantec multistar ultra |
Bronze Member Username: Jigga19
Post Number: 47
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:34 pm: |
|
can someone answer my qyestion please. should i just upload the bin or do all the steps again..as in upload j27 bin first..can someone answer this please im waiting to upload the new bin..i just need a yes or no.. |
Bronze Member Username: Maro
Post Number: 42
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:34 pm: |
|
hey guys (all of you) go on: http://www.ftabins.net/forumdisplay.php?f=35
and then find your receiver and convert it
okay? |
New member Username: Ansari66
NewYork,
NY
USA
Post Number: 1
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:36 pm: |
|
Can Some one help me with C**lsat 5000. I have loaded the latest Bin 151. I am no geting any channel. I know how codes were entered eralier for DN. But, I now learnt that DN has two seperate ID 1010 and other. I never changed ID before it was always DN 0001 on Nagarvision. What doI have to do now else do not know codes |
Bronze Member Username: Jigga19
Post Number: 48
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:36 pm: |
|
marwan i have the loader and the files.. i just want to know do i have to go trhu all the steps again or can i just load the new bin and start from that step. |
Bronze Member Username: Maro
Post Number: 43
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:38 pm: |
|
what do you meen again do you mean that you did the steps and it didnt work |
New member Username: Marca835
Post Number: 6
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:39 pm: |
|
hi, can anyone help me for my buzz s2010f
because after download I got 'E' or 'S' on my clock screen receiver.
normaly after download, I have to see 'Save' and after that 'good' and finaly 'clock' or channel number
please help
thank you
|
Bronze Member Username: Jigga19
Post Number: 49
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:41 pm: |
|
no i havent done the steps. i have the new bin jvvh 18. what i mean is
1.use blacklist Updater V1.4
2.turn off receiver from rear switch
3.Use a straight cable
4.turn on rear switch
5.load bin file j27_205_1
6.WAIT 2-3 MINSDONT TOUCH ANYTHING JUST LET IT DO ITS THING YOU WILL SEE A FLASHING B75 THIS IS NORMAL
JUST WAIT TILL YOU SEE "ON" NOTHING ELSE
7.turn off from rear switch then back on
8.load bin file cs_208T _serial
9.WAIT 2-3MINS DO NOT TOUCH RECEIVER WAIT UNTIL YOU SEE "ON"
10. turn off rear switch
10.Connect to tv do a complete setup and scan
do i go thru all the above steps or can i jus upload the new bin without steps 1 to 5 |
Bronze Member Username: Maro
Post Number: 44
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:42 pm: |
|
hey marc rayan go to http://www.ftabins.net/forumdisplay.php?f=35 and then find your receiver and download the last version of your receiver |
Bronze Member Username: Jigga19
Post Number: 50
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:43 pm: |
|
marwan did you read my post? |
Bronze Member Username: Maro
Post Number: 45
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:44 pm: |
|
Rohail wich receiver do you have ? |
Bronze Member Username: Jigga19
Post Number: 51
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:45 pm: |
|
pansat 3000 converted into pansat 2700 |
Bronze Member Username: Maro
Post Number: 46
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:47 pm: |
|
is it already converted i mean do you have a pansat 2700 now |
Bronze Member Username: Jigga19
Post Number: 52
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:47 pm: |
|
yes |
Bronze Member Username: Maro
Post Number: 47
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:51 pm: |
|
ok so you can download this file:http://www.hostclip.com/dl/868f92aae497762e3c7a60f32cfc45a0 and you should be okay |
Bronze Member Username: Jigga19
Post Number: 53
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:53 pm: |
|
why am i downloading a different bin i was told i should only upload jvvh bins to my converted pansat 2700 |
New member Username: Ansari66
NewYork,
NY
USA
Post Number: 2
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 05:53 pm: |
|
can some one help me with C**LSat 5000
I have loaded the latest Bin 151. I am no geting any channel. I know how codes were entered eralier for DN. But, I now learnt that DN has two seperate ID 1010 and other. I never changed ID before it was always DN 0001 on Nagarvision. What else do I have to do now. How codes will now be entered for two DN ID |
Bronze Member Username: Jigga19
Post Number: 54
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 05:54 pm: |
|
marawan why am i downloading a different bin i was told i should only upload jvvh bins to my converted pansat 2700 |
Bronze Member Username: Maro
Post Number: 48
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 05:56 pm: |
|
hey Muhammad Afzal i dont understand your post do you mean that you dont know the codes or that you dont knoe how to put it try to be more clear |
Bronze Member Username: Jigga19
Post Number: 55
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 06:01 pm: |
|
marawan why am i downloading a different bin i was told i should only upload jvvh bins to my converted pansat 2700 |
Bronze Member Username: Maro
Post Number: 49
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 06:01 pm: |
|
if you already convert your receiver to a pansat 2700 you can download this file: http://www.hostclip.com/dl/46828ce60b4c5c06e7c09d50c4b273f7 but thats only if you have already convert your receiver to a pansat 2700a/e |
Bronze Member Username: Jigga19
Post Number: 56
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 06:03 pm: |
|
ok now im confused bro. i was told by AV not to use an but jvvh bins since my convertion tool was jv's so why am i downloading a completly different bin |
Bronze Member Username: Maro
Post Number: 50
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 06:05 pm: |
|
but the bin here: http://www.hostclip.com/dl/46828ce60b4c5c06e7c09d50c4b273f7 is a jvvh |
Bronze Member Username: Jigga19
Post Number: 57
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 06:07 pm: |
|
oh yea sorry about that your previous link had a different file.. yes i already have the file. i just wanted to know should is traigh upload the bin. or should follow the steps as i mentioned before from 1 to 10 or can i skip steps 1 to 5 and jus upload the bin |
Bronze Member Username: Maro
Post Number: 51
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 06:09 pm: |
|
no you can skip its okay because the other steps was for converting so you can sikip and put this file: http://www.hostclip.com/dl/46828ce60b4c5c06e7c09d50c4b273f7 |
Bronze Member Username: Jigga19
Post Number: 58
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 06:11 pm: |
|
thankyou for your help. |
Bronze Member Username: Maro
Post Number: 52
Registered: May-06
|
| Posted on Friday, October 26, 2007 - 06:12 pm: |
|
you re welcome |
Bronze Member Username: Halo
Toronto,
Ontario
Canada
Post Number: 26
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:21 pm: |
|
Dish keys, BEv keys and converting 2500 - 2700 information/files on www.dish-keys.blogspot.com |
New member Username: Kiarra12
Post Number: 2
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:22 pm: |
|
hi,
I posted earlier about my echostar 3100. I know its old and most people have FTA but I don't. Could someone direct me to a place to get the bin for it or tell me what to do?
Thanks |
New member Username: Zahra
Post Number: 2
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:24 pm: |
|
hi firend can some one tell me how can i flach my 2500 clone pleaze thnks |
Bronze Member Username: Ill0_ill
Post Number: 18
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:26 pm: |
|
Fix is available for Advance-Sat, Skyview, Captive Works, Pansat3500,2700,Coolsat5000,6000, Viewsat, Pantec 2500(Fortec Star Ultra-Blue Strip, Eagle Star) |
New member Username: Ansari66
NewYork,
NY
USA
Post Number: 3
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:27 pm: |
|
Marawan:
Thanks for your attention. This what I mean. I have loaded latest bin 151 bu t receing no channel ...contd |
New member Username: Zahra
Post Number: 3
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:30 pm: |
|
hi av can u telle me how i can flach my 2500 clone plz |
New member Username: Ansari66
NewYork,
NY
USA
Post Number: 4
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:32 pm: |
|
I learnt that DN now has two ID's 1010 and someting else. I never had to worry about DN ID's becuse my Sat always had DN 0001 on Nagravision. I found two rows of codse that I entered in my box manulalay. What I should now be doing differently as DN has two ID's that I do not find when I enter 8282 on my box |
New member Username: Ansari66
NewYork,
NY
USA
Post Number: 5
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 06:34 pm: |
|
Marawan:
R U there? |
Bronze Member Username: Jigga19
Post Number: 59
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 06:49 pm: |
|
does anyone know if aria 700 files are out. |
Bronze Member Username: Huremkic
Post Number: 17
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 07:02 pm: |
|
guys, what is loader for converted pansat 2500 to 2700 I know bin file is jvvh218 , and what is loader and bin file for converted pantec multistar ultra |
Bronze Member Username: Atul_shah
Post Number: 26
Registered: Oct-06
|
| Posted on Friday, October 26, 2007 - 07:03 pm: |
|
i tried to download the latest bin to my pansat 2700A and after that nothing works. Even i dont see any channel nos except the small light which goes from one end to another ?? what coudl be the problem ?? |
Bronze Member Username: Huremkic
Post Number: 18
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 07:07 pm: |
|
hellllooooo do }you hear me I need heeelpppp |
Bronze Member Username: Jigga19
Post Number: 60
Registered: Feb-07
|
| Posted on Friday, October 26, 2007 - 07:08 pm: |
|
the channels are working. atul how many dishes you have |
New member Username: Deepa
Post Number: 3
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 07:08 pm: |
|
hi,
i know that everyones really busy, but if anyone knows if the fix is out for extremeview magnum 3300. i would really appreciate it if they could let me know where it is...
thank you |
Bronze Member Username: Ameen
Post Number: 36
Registered: Feb-06
|
| Posted on Friday, October 26, 2007 - 07:10 pm: |
|
hey you guys, I downloaded the right bin for xtreme viewsat 2000 last night and everything was working well. tonight I have nothing everything went away, no signal nothing, I need help and ideas how to fix it!
thanks |
New member Username: Omar_nab
Post Number: 7
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 07:17 pm: |
|
hi
i have pansat 2500a original which bin file and laoder can i use to convert at 2700 please help |
Bronze Member Username: Trinity
Post Number: 32
Registered: Oct-06
|
| Posted on Friday, October 26, 2007 - 07:29 pm: |
|
Hello,
Can someone please help me here. I had someone download the new bin on my Satellite panset 2700a
There was no EK3kU so I did a satellite scan and now the 3KU satellite shows all EF7KU (119) channels. How come? I do not see a single 3KU channel. What can I do? Please help!!!!!!!!!!! |
New member Username: Marca835
Post Number: 7
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 07:30 pm: |
|
thanks marawan I will try |
New member Username: Ather_da_don
Mississauaga,
Ontario
Canada
Post Number: 8
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 07:30 pm: |
|
Visit www.dishkeyz.blogspot.com for latest dishkeys!!! |
Gold Member Username: Nydas
Post Number: 4283
Registered: Jun-06
|
| Posted on Friday, October 26, 2007 - 07:38 pm: |
|
2500 to 2700 conversion - what next?
Once it is converted with an older BIN and shows B75, for the latest BIN turn the receiver on and when it goes to B-7, start eh upload of the latest BIN. |
Gold Member Username: Nydas
Post Number: 4284
Registered: Jun-06
|
| Posted on Friday, October 26, 2007 - 07:40 pm: |
|
AV: I upgraded one more Pansat 2500 clone - went through 205 then 208, then 213 and then 218, The Echo 3 channels are working and the Echo 110 is working fine. I don't see Provider ID 0106 in Nagra 2. |
Bronze Member Username: Ameen
Post Number: 38
Registered: Feb-06
|
| Posted on Friday, October 26, 2007 - 07:43 pm: |
|
hello Nalin,
please let me know what is going on with xtreme veiwsat 2000. I down loaded the new bin last night and worked well. today there is nothing, no channels noting, it says searching for signal!
please help |
Silver Member Username: Oleg1474
New port richey,
Fl
Usa
Post Number: 389
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 07:46 pm: |
|
How to upload bin for 2700 & 3500
« on: 10/26/2007»
--------------------------------------------------------------------------------
http |
Bronze Member Username: Kb1
Post Number: 17
Registered: Aug-07
|
| Posted on Friday, October 26, 2007 - 07:48 pm: |
|
After downloading new 2700 clone bin I don't have sat 60.5 instead I have 110 119 and 91 out of this I only get internation channel on 119 but no other channel |
Silver Member Username: Oleg1474
New port richey,
Fl
Usa
Post Number: 390
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 07:48 pm: |
|
How to upload bin for 2700 & 3500
« on: 10/26/2007»
--------------------------------------------------------------------------------
www.fta4dummies.com |
Silver Member Username: Oleg1474
New port richey,
Fl
Usa
Post Number: 391
Registered: Aug-06
|
| Posted on Friday, October 26, 2007 - 07:49 pm: |
|
How to upload bin for 2700 & 3500
« on: 10/26/2007»
www.fta4dummies.com |
Gold Member Username: Nydas
Post Number: 4289
Registered: Jun-06
|
| Posted on Friday, October 26, 2007 - 07:49 pm: |
|
shaheen : Switch off and on at back. If no picture, do set default keys and let the keys autoroll again.
If no go, reload the BIN |
New member Username: Oldcomputer
Post Number: 1
Registered: Oct-07
|
| Posted on Friday, October 26, 2007 - 07:57 pm: |
|
Just tried to convert 2500 to 2700. Wrote j27 bin fine, but never rebooted. After 5 minutes, I turned off unit and turned back on. Nothing, no lights, no blinks, nothing. What have I messed up and how do I fix it?
THanks in advance for the help. |
Bronze Member Username: Hjaved916
High point,
Nc
Usa
Post Number: 12
Registered: Jan-07
|
| Posted on Friday, October 26, 2007 - 08:11 pm: |
|
hey,
we need a file for fortec star lifetime ulta,
can you do us that favore please
thank u!!!!!!!!} |
Bronze Member Username: Hjaved916
High point,
Nc
Usa
Post Number: 13
Registered: Jan-07
|
| Posted on Friday, October 26, 2007 - 08:12 pm: |
|
hey,
we need a file for fortec star lifetime ulta,
can you do us that favore please
thank u!!!!!!!! |
Bronze Member Username: Trinity
Post Number: 33
Registered: Oct-06
|
| Posted on Friday, October 26, 2007 - 08:12 pm: |
|
Can someone please help me? My 3KU satellite is showing all 7KU channels. Please help!!!!!!
Appreciate your help |
