| Author |
Thread: FLU dead week after conversion to 2700 |
    
New member Username: Mancella
Post Number: 2
Registered: May-06
|
| Posted on Sunday, September 02, 2007 - 10:36 am: |
|
Hi all,
I successfully converted my FLU to 2700 over a week ago and it has been working great until yesterday. When I turn on the box, B 7 5 flashes, and then the box just loses power. I turn off the switch and turn back on and the same thing over and over.
I've tried reflashing the BIN as soon as the box turns on and it goes to 100% successfully, then the box shows the B 75 and loses power again.
Does anyone have any recommendations or is my box dead? It seems to be booting and accepting BIN downloads so I don't see why it all of the sudden, refuses to turn on.
Any ideas would be greatly appreciated. |
|
|
|
Silver Member Username: Asharfi
Post Number: 756
Registered: Aug-06
|
| Posted on Sunday, September 02, 2007 - 02:04 pm: |
|
Well, it's been 2 weeks now, and my converted FLU is still working fine with the autoroll. It looks like there's some hardware problem with your receiver. |
New member Username: Mancella
Post Number: 3
Registered: May-06
|
| Posted on Sunday, September 02, 2007 - 02:10 pm: |
|
I just unplugged the coaxial on the back from the satellite connection and it booted without that. I plugged back in and it seems to be working fine now. very strange |
Gold Member Username: Nydas
Post Number: 3570
Registered: Jun-06
|
| Posted on Monday, September 03, 2007 - 12:11 pm: |
|
All's well that ends well. |
|
