| Author |
Thread: Archive through July 06, 2007 |
    
Bronze Member Username: Will_d
Post Number: 25
Registered: Nov-06
|
| Posted on Wednesday, June 20, 2007 - 04:26 pm: |
|
keys r down all,new keys pls? |
|
|
|
New member Username: Cacalad
Post Number: 9
Registered: Apr-07
|
| Posted on Wednesday, June 20, 2007 - 04:27 pm: |
|
need new keys please |
New member Username: Magicmeraj
Mississauga,
ON
Canada
Post Number: 9
Registered: Jun-07
|
| Posted on Wednesday, June 20, 2007 - 04:30 pm: |
|
86,00: C9823AAE0B0F2459BBCD40B50DEB6C43
96,01: CBFB84C09781545E417F6A72B02D0CBC |
Bronze Member Username: K98
Post Number: 36
Registered: Jan-07
|
| Posted on Wednesday, June 20, 2007 - 04:41 pm: |
|
thanks magicmeraji welcome to the club |
Platinum Member Username: Lklives
Post Number: 10096
Registered: Jan-06
|
| Posted on Wednesday, June 20, 2007 - 04:45 pm: |
|
Keymaster 4.0
----------------------------------------
DN and Bev Keys Feed
Nagra 2 keys
----------------------------------------
Dish Provider 0101: Last Updated (20 June '07 4:30pm EST)
Key 0: C9 82 3A AE 0B 0F 24 59 BB CD 40 B5 0D EB 6C 43 (Active)
Key 1: CB FB 84 C0 97 81 54 5E 41 7F 6A 72 B0 2D 0C BC
Bev Provider 0901: Last Updated (6 June '07 2:45 PM EST)
Key 0: E3 56 7B 2F 6C C1 51 FF D9 42 4D 8A D3 3E 44 C5 (Active)
Key 1: F1 69 FA E9 5F 6E 33 94 5E 28 F3 C4 99 5A 00 F5 |
New member Username: Zidane88
Post Number: 3
Registered: Jun-07
|
| Posted on Wednesday, June 20, 2007 - 07:38 pm: |
|
SamS: So did the same thing happen to you? Did the 119 dish channels completely disappear with no signal? Was it fixed when you switched the wire or connected the wires directly to the receiver?
Thanks alot for your help. |
New member Username: Rat
Post Number: 10
Registered: Jun-07
|
| Posted on Thursday, June 21, 2007 - 09:04 am: |
|
What should my disEqC and Skew be set at for sat 119 echo 7/ku and 8/ku?
I have good quality and level, proper keys, but no pic. Trying to figure out why. HelP Please |
Platinum Member Username: Lklives
Post Number: 10109
Registered: Jan-06
|
| Posted on Thursday, June 21, 2007 - 10:11 am: |
|
to aligh the dish (skew etc) use the sat calculators in the "recommended reputable sites' thread here...
your disque settings should be whatever LNB type u have, and determined by how u ran the cables...
Are u pullin out chains, or just haven't read 1 thing?...your questions show a total lack of reading.. |
Gold Member Username: Nydas
Post Number: 2893
Registered: Jun-06
|
| Posted on Thursday, June 21, 2007 - 12:36 pm: |
|
Rat: As a matter of convention,
Echo 7 (119W) is usually set to DisEqC Port #1
Echo 8.1 (110W) is usually set to DisEqC Port #2
It does not always have to be so on all LNBs but best to follow convention. If you haver additional sats and 4 to 1 DisEqC switch , use Port #3 and #4 for the other SAT/LNBs
Satellite Angle Calculators
http://www.satellitenut.com/calculators/SatelliteHeading.html
http://www.remotesat.com/lookangle.htm |
New member Username: Bobby5612
Warsaw,
In
United States
Post Number: 6
Registered: Jun-07
|
| Posted on Thursday, June 21, 2007 - 06:25 pm: |
|
i still need help |
Bronze Member Username: Will_d
Post Number: 26
Registered: Nov-06
|
| Posted on Thursday, June 21, 2007 - 07:52 pm: |
|
keys r down,new keys pls? |
New member Username: Pike_376
Post Number: 8
Registered: Nov-06
|
| Posted on Thursday, June 21, 2007 - 07:52 pm: |
|
does anyone have new keys for dishnet as of 6/21/07 at 7:45 |
Bronze Member Username: Rnhanna
Post Number: 11
Registered: Oct-06
|
| Posted on Thursday, June 21, 2007 - 07:59 pm: |
|
Dishnet Key 01
FA 48 09 8E D7 E2 FE 3F E8 A3 5B 76 BF 4F 27 A1 |
New member Username: Moej1991
Post Number: 4
Registered: Jun-07
|
| Posted on Thursday, June 21, 2007 - 08:00 pm: |
|
keys plezzzzzzzzzzzzzzzz |
Gold Member Username: Nydas
Post Number: 2894
Registered: Jun-06
|
| Posted on Thursday, June 21, 2007 - 08:00 pm: |
|
DN - Provider ID 0101
Key 00 (86):
C9 82 3A AE 0B 0F 24 59
BB CD 40 B5 0D EB 6C 43
Key 01 (96):
FA 48 09 8E D7 E2 FE 3F
E8 A3 5B 76 BF 4F 27 A1 |
Silver Member Username: Jpz
MTL,
QC
CAnada
Post Number: 210
Registered: Jun-06
|
| Posted on Thursday, June 21, 2007 - 08:01 pm: |
|
key 01: FA 48 09 8E D7 E2 FE 3F E8 A3 5B 76 BF 4F 27 A1 |
Bronze Member Username: Jokerisback
Post Number: 29
Registered: Sep-06
|
| Posted on Thursday, June 21, 2007 - 08:02 pm: |
|
hey guys does anybody have the new files for pansat 3500sd if so can you email it to me on mydoggyfriend@yahoo.com
thanks |
Silver Member Username: Canndy
Www.livefta.com,
Www.livefta.com
Www.livefta.com
Post Number: 377
Registered: Nov-06
|
| Posted on Thursday, June 21, 2007 - 09:20 pm: |
|
www.livefta.com
www.fta123.blogspot.com - latest keys |
New member Username: Illspamu
Post Number: 3
Registered: Feb-07
|
| Posted on Thursday, June 21, 2007 - 09:37 pm: |
|
Hi guys, I currently enjoy a Pansat 3500sd, which has been working great, except for the chanel blocking options, which is kind of not great, is there a diferent device or sw version that will make those work? |
New member Username: Iagainsti
Post Number: 1
Registered: Jan-07
|
| Posted on Thursday, June 21, 2007 - 10:40 pm: |
|
thx man...i dun know how u guys get these keys..but thx fo sharing |
Gold Member Username: Nydas
Post Number: 2898
Registered: Jun-06
|
| Posted on Thursday, June 21, 2007 - 10:43 pm: |
|
If you have the latest BIN, it is usually capable of getting keys without manual entry. |
Bronze Member Username: To_munda
GTA,
Ont
Post Number: 19
Registered: May-06
|
| Posted on Friday, June 22, 2007 - 01:35 am: |
|
No Indian channels showing right now.
Any clues??? |
New member Username: Babarsher
Post Number: 2
Registered: Feb-07
|
| Posted on Friday, June 22, 2007 - 01:43 am: |
|
Hi guys can you provide latest bin for cool tech 4000 pro
Thanks |
Silver Member Username: Crazy_greek
Post Number: 974
Registered: Jul-06
|
| Posted on Friday, June 22, 2007 - 12:12 pm: |
|
TVKeyz.com says they are the fastes....
Bullshit, I have found them to be a day late and a dollar short.
Key Ripper is the man. |
Bronze Member Username: Jokerisback
Post Number: 30
Registered: Sep-06
|
| Posted on Friday, June 22, 2007 - 08:16 pm: |
|
Pansat Files » X-05BL_070318_317T_api.zip
or
Pansat Files » X-05BL_070318_317_api.zip
Which one do i use to to run my pansat 3500sd and do i need any thing else?} |
Platinum Member Username: Lklives
Post Number: 10154
Registered: Jan-06
|
| Posted on Friday, June 22, 2007 - 09:05 pm: |
|
U need to go read at the Pansat site www.future-fta.info ...and get their manuals, guides, how to's, and latest bins and loaders.. |
Bronze Member Username: Hrrysoni
IL
U.S.A
Post Number: 23
Registered: Sep-06
|
| Posted on Friday, June 22, 2007 - 09:42 pm: |
|
Does anyone have the new keys for Dish?? I've tried entering the keys in from keyripper and tvkeyz.com, however they didn't work. I would really appreciate it if someone can post it. Thanks in advance. |
Bronze Member Username: Hrrysoni
IL
U.S.A
Post Number: 24
Registered: Sep-06
|
| Posted on Friday, June 22, 2007 - 10:06 pm: |
|
never mind guys.... |
Bronze Member Username: Khopdi
Post Number: 23
Registered: Apr-07
|
| Posted on Saturday, June 23, 2007 - 10:12 am: |
|
I am no expert here. My Pansat 3500SD gave out on me. I checked everything; keys, cables, settings, etc... But nothing. Then I did a simple autoroll (press set default key, turn off via back switch, turn on and wait for keys to roll). Now everything is fine. I hope this helps. |
Platinum Member Username: Lklives
Post Number: 10169
Registered: Jan-06
|
| Posted on Saturday, June 23, 2007 - 10:45 am: |
|
Congrats...usually simple solutions like that, especially a reboot, is the answer...and enabling your autoroll...or a manual key input SAVED, and a reboot..and patience and perserverance.. |
Bronze Member Username: Jokerisback
Post Number: 31
Registered: Sep-06
|
| Posted on Saturday, June 23, 2007 - 01:46 pm: |
|
does any body have the recent channel list for Pansat 3500sd? |
New member Username: Yjavariz
Post Number: 10
Registered: Oct-06
|
| Posted on Saturday, June 23, 2007 - 03:57 pm: |
|
new keys? |
Bronze Member Username: Outback901
Post Number: 11
Registered: Jan-06
|
| Posted on Saturday, June 23, 2007 - 07:05 pm: |
|
new keys please thank you |
New member Username: Kash101
Post Number: 1
Registered: Jun-07
|
| Posted on Saturday, June 23, 2007 - 09:14 pm: |
|
can someone help me set up pansat 3500 |
Bronze Member Username: Rat
Post Number: 11
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 08:37 am: |
|
I also need help with set up. I have a Pansat 2500a. I was connected, but tried to move to another tv and I am out. I have good level and quality, the right codes, but no pic. Help...... |
Bronze Member Username: Rat
Post Number: 13
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 04:36 pm: |
|
Read above... Also, just figured out that I can only view channels with Down Frequency 12661 MHz What does this mean? From this info can someone help me get my other channels? |
Platinum Member Username: Lklives
Post Number: 10214
Registered: Jan-06
|
| Posted on Monday, June 25, 2007 - 05:19 pm: |
|
rat...learn how to use the internet and site forums/message boards...
U do NOT post the same thing 3 times...MOST sites will ban U for that!
U do READ before U post!
U ONLY post issues that are related to the thread subject...in this case "new keys"...
What U have done is STEALING aka "hijack" this thread... |
Bronze Member Username: Rat
Post Number: 18
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 05:27 pm: |
|
Ha Ha. I have read about 50 of your posts that don't have anything to do with the site thread. Correction, 10214 of your posts. You should be banned for your negativity. Also, I read the basics and I don't see anywhere where it talks about the down freq. Also, read all the other requests. Don't you see other questions other than new keys? Your an idiot. |
Gold Member Username: Nydas
Post Number: 2911
Registered: Jun-06
|
| Posted on Monday, June 25, 2007 - 05:32 pm: |
|
Rat: LK is fossilized in the old days of hobbyists trying to hack BINs. People like him will never understand that this is no longer a hobby, but simply a new gadget to view TV.
I have not understood your problem, rat. However, Kevin will probably answer it. Ignore LK - he is pest. |
Platinum Member Username: Lklives
Post Number: 10215
Registered: Jan-06
|
| Posted on Monday, June 25, 2007 - 06:42 pm: |
|
Nalin...U are the trouble here...rat is a newbie, who I simply was trying to educate on use of Dss forums...and how to better himself..
U, on the other hand, are a WASTE here and contribute nothing but your ego!...U intentionally seek me out, then ridicule me for educating a newbie...U should leave here permanently..U are of no value to newbies or the regulars here!...hell, nobody even likes U either! |
Gold Member Username: Nydas
Post Number: 2912
Registered: Jun-06
|
| Posted on Monday, June 25, 2007 - 07:04 pm: |
|
LK: rat asked a question. You obviously did not have an answer to you except your usual "go and read".
YOU go and read and then come back answer. In the meantime, get off this thread where you have nothing to contribute except your rudeness. |
Platinum Member Username: Lklives
Post Number: 10222
Registered: Jan-06
|
| Posted on Monday, June 25, 2007 - 07:11 pm: |
|
bite me camel muncher... |
Gold Member Username: Nydas
Post Number: 2915
Registered: Jun-06
|
| Posted on Monday, June 25, 2007 - 07:18 pm: |
|
LK: Don't highjack this thread. Start your own thread if you want to educate people on profanity. |
Bronze Member Username: Rat
Post Number: 20
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 07:21 pm: |
|
For the record, Nalin has helped me out before. |
Bronze Member Username: Sobe1
South beach,
Fl
Post Number: 17
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 07:33 pm: |
|
this one is for Rat and his Master Nalin
 |
Bronze Member Username: Rat
Post Number: 23
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 07:48 pm: |
|
sobe,
you must be lk's daughter. Didn't mean to bring the kids into this. My bad. Great family portrait of the two of you though. |
Bronze Member Username: Sobe1
South beach,
Fl
Post Number: 21
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 07:50 pm: |
|
hey cartier1 or nalin how are you.still have that limp problem your mother told me about. |
Platinum Member Username: Lklives
Post Number: 10230
Registered: Jan-06
|
| Posted on Monday, June 25, 2007 - 07:52 pm: |
|
rat...U are a newbie here...U will NOT be gettng much help here by bashing senior people to U...U are the new kid on the block...I simply told u to go read, then U cop an attitude to me with your lesbo friend nalin...U are now screwed here...don't expect too much help now.. |
Bronze Member Username: Rat
Post Number: 25
Registered: Jun-07
|
| Posted on Monday, June 25, 2007 - 08:09 pm: |
|
LK, I would have never copped an attitude if I wasn't disrespected. All you had to say was that you didn't know the answer and I should research. Better yet, you didn't have to say anything at all. I admit, I am a newbie here. Does that mean that I don't deserve respect when posting a question? If so, I will just find another forum to ask my questions, no biggie. It's cool. This aint my life. |
Bronze Member Username: To_munda
GTA,
Ont
Post Number: 20
Registered: May-06
|
| Posted on Monday, June 25, 2007 - 08:46 pm: |
|
Does neone have new keys??? |
New member Username: Veryevilnip
Winnipeg,
Mb
Canada
Post Number: 2
Registered: Oct-06
|
| Posted on Monday, June 25, 2007 - 09:08 pm: |
|
anyone know why the first series of channels on the dishnet sat is no signal?
i can get all the channels except the fist 15 or so channels,example usa netwerk 105.
i did a reboot,tp scan,blind scan,network scan,it comes on for a few seconds and it loses the signal.
is there new keys as of today?
thank you all in advance! |
Gold Member Username: Nydas
Post Number: 2917
Registered: Jun-06
|
| Posted on Monday, June 25, 2007 - 09:58 pm: |
|
sobe: Go back to your Spanish thread. You do not know enough English. |
New member Username: Cacalad
Post Number: 10
Registered: Apr-07
|
| Posted on Tuesday, June 26, 2007 - 08:05 pm: |
|
need new keys please anybody |
Gold Member Username: Nydas
Post Number: 2928
Registered: Jun-06
|
| Posted on Tuesday, June 26, 2007 - 08:08 pm: |
|
DN - Provider ID 0101
Key 00 (86):
C5 42 C5 AE 9B 04 1D AA
AA DC FC 40 99 82 3B D1
Key 01 (96):
FA 48 09 8E D7 E2 FE 3F
E8 A3 5B 76 BF 4F 27 A1 |
Silver Member Username: Jpz
MTL,
QC
CAnada
Post Number: 211
Registered: Jun-06
|
| Posted on Tuesday, June 26, 2007 - 08:08 pm: |
|
new keys please |
Bronze Member Username: Rexandpansat
Post Number: 36
Registered: Jul-06
|
| Posted on Tuesday, June 26, 2007 - 08:09 pm: |
|
Nalin,
You are fast !! |
Bronze Member Username: K98
Post Number: 37
Registered: Jan-07
|
| Posted on Tuesday, June 26, 2007 - 08:16 pm: |
|
nalil you are the fastest of them all good work thanks |
Bronze Member Username: Walidsm
Post Number: 18
Registered: Aug-05
|
| Posted on Tuesday, June 26, 2007 - 08:22 pm: |
|
Nalin
First, thank you for the keys. Second I have a pansat 2500A and I use bin 289. The problem is when I turn the receiver on from th button in the back, I have to wait form 2 to 15 mins until it works. Also, it sometimes turns off alone and to work again I have to wait again 2 to 15 min. By the way, I was using the bin 293T but it made the same problems in addition it was freezing every time I change the chanel. Therefore I decided to use 289. Do u have any solution. |
Bronze Member Username: K98
Post Number: 38
Registered: Jan-07
|
| Posted on Tuesday, June 26, 2007 - 08:33 pm: |
|
nalin is the best so back off rednecks |
Gold Member Username: Nydas
Post Number: 2929
Registered: Jun-06
|
| Posted on Tuesday, June 26, 2007 - 08:37 pm: |
|
W: Use 293T, but keep the autoroll and autotp off, except when it is obvious new keys are trying to come in. At that time turn autoroll on, switch off at the back and then switch on.
With your current set up, start first with 280T and then go to 293T.
During changes, make sure you take care of user setup and if necessary rescan using blind scan.
Happy viewing.. |
Bronze Member Username: Evilnip
Winnipeg,
Manitoba
Canada
Post Number: 28
Registered: Oct-06
|
| Posted on Tuesday, June 26, 2007 - 09:22 pm: |
|
DISH - June 26
86: C5 42 C5 AE 9B 04 1D AA AA DC FC 40 99 82 3B D1
96: FA 48 09 8E D7 E2 FE 3F E8 A3 5B 76 BF 4F 27 A1 |
Silver Member Username: Canndy
Www.livefta.com,
Www.livefta.com
Www.livefta.com
Post Number: 379
Registered: Nov-06
|
| Posted on Tuesday, June 26, 2007 - 10:08 pm: |
|
don't bog down ecoustics guys
just logon to www.fta123.blogspot.com or any other key site to find out the latest keys... |
Silver Member Username: Runnerguy
Pluto
Post Number: 335
Registered: Sep-06
|
| Posted on Tuesday, June 26, 2007 - 10:52 pm: |
|
 |
New member Username: Moej1991
Post Number: 5
Registered: Jun-07
|
| Posted on Wednesday, June 27, 2007 - 04:43 pm: |
|
evrybody on dis has no life ya stupid jus staying on dis all day |
Bronze Member Username: Walidsm
Post Number: 19
Registered: Aug-05
|
| Posted on Thursday, June 28, 2007 - 12:17 am: |
|
Thank you very much Nalin for paying attention to my question and I' going to do what u advised.
Have a good night |
Gold Member Username: Dude123
Post Number: 1044
Registered: Jul-06
|
| Posted on Thursday, June 28, 2007 - 12:50 am: |
|
Long time no see....How have you all been???? |
Bronze Member Username: Jowhar
Post Number: 92
Registered: Jun-06
|
| Posted on Thursday, June 28, 2007 - 01:47 am: |
|
The One good to have you back. |
Bronze Member Username: Outback901
Post Number: 12
Registered: Jan-06
|
| Posted on Thursday, June 28, 2007 - 09:25 am: |
|
Hi, looking for the new keys for the pansat
Thank you |
Silver Member Username: Crazy_greek
Post Number: 999
Registered: Jul-06
|
| Posted on Thursday, June 28, 2007 - 09:50 am: |
|
Hey D.P.
They are here...http://www.tvkeyz.com
Last Update...06/26/07 |
Bronze Member Username: Rainman62
Post Number: 25
Registered: Nov-06
|
| Posted on Thursday, June 28, 2007 - 11:25 am: |
|
Nalin and LK, I want to thank both of you for your suggestion of getting a used DN receiver and hook it up. I did and now all my channels are back normal. My dish has been running fine for 2 days now after a week of interruption. If you recall, I lost the signal on all the channels.
Keep up the good work. |
Gold Member Username: Dude123
Post Number: 1045
Registered: Jul-06
|
| Posted on Thursday, June 28, 2007 - 01:59 pm: |
|
D.P
Keys havn't changed since the 26th same old ones...here they are...
DISH NETWORK: Nagra 2
Key 0: C5 42 C5 AE 9B 04 1D AA AA DC FC 40 99 82 3B D1
Key 1: FA 48 09 8E D7 E2 FE 3F E8 A3 5B 76 BF 4F 27 A1 |
Bronze Member Username: Srpskkisiin
Post Number: 22
Registered: Mar-07
|
| Posted on Thursday, June 28, 2007 - 04:31 pm: |
|
http://www.jordinclub.com/forum
Visit for newest keys, fastest way to get them, they are updated as soon as they change. |
New member Username: Whiteknight88
Canada
Post Number: 1
Registered: Jun-07
|
| Posted on Thursday, June 28, 2007 - 05:18 pm: |
|
Hey everyone,
I was wondering where i could find all the full names of the stations from the sat. channels.
For example, IMF stands for International Music Feed. But how about the others? (because not all full names appear in that blue bar after selecting the channel) |
Bronze Member Username: Hrrysoni
IL
U.S.A
Post Number: 25
Registered: Sep-06
|
| Posted on Thursday, June 28, 2007 - 07:56 pm: |
|
Have the keys changed? Because my pansat is not working..am i the only one experiencing this problem?? |
New member Username: Nvs
Post Number: 6
Registered: Feb-07
|
| Posted on Thursday, June 28, 2007 - 07:57 pm: |
|
key please |
Bronze Member Username: Hrrysoni
IL
U.S.A
Post Number: 26
Registered: Sep-06
|
| Posted on Thursday, June 28, 2007 - 08:02 pm: |
|
Never mind; my pansat is working. Keys haven't changed yet. |
New member Username: Johnkapo
Post Number: 5
Registered: May-07
|
| Posted on Thursday, June 28, 2007 - 10:12 pm: |
|
new keys pls... |
New member Username: Mar75
Post Number: 2
Registered: Sep-06
|
| Posted on Friday, June 29, 2007 - 12:03 am: |
|
i have a pansat 2700 and most of the arabic chanels are gone i rescaned it the sat ECH 9/T-13/KU but no luck i get the message 'scramble or bad chanel'can you guys help please
Thanks |
Gold Member Username: Nydas
Post Number: 2950
Registered: Jun-06
|
| Posted on Saturday, June 30, 2007 - 10:50 am: |
|
With Pansat 2700, you need to install Boot B-75 using loader 27.02, followed by Bin 203.
This info is for genuine Pansat 2700. Read at
http://www.future-fta.info
http://www.dssrookie.com
http://www.al7bar*tk |
Platinum Member Username: Lklives
Post Number: 10263
Registered: Jan-06
|
| Posted on Saturday, June 30, 2007 - 10:57 am: |
|
Nick...for Dishnetwork (DN) full channel names and ANY info or updates go here...
http://ekb.dbstalk.com/dishlist.htm |
New member Username: Illspamu
Post Number: 4
Registered: Feb-07
|
| Posted on Saturday, June 30, 2007 - 12:03 pm: |
|
I have a pansat 3500 sd, and the latest keys (6/26) and I cant see the world!!!
is it time for a new bin? |
New member Username: Bigguy
Post Number: 2
Registered: Jun-07
|
| Posted on Saturday, June 30, 2007 - 09:36 pm: |
|
I have a Fortec Lifetime Ultra and all channels went scrambled today and no rolling... I must need a new bin too.. |
Bronze Member Username: Kikim
Windsor,
Ontario
Canada
Post Number: 27
Registered: Oct-06
|
| Posted on Monday, July 02, 2007 - 10:44 am: |
|
hi, anyone know if i can wach soccer copa america on dish 110,thanks |
Bronze Member Username: Gastrognome
Post Number: 38
Registered: Dec-06
|
| Posted on Monday, July 02, 2007 - 12:53 pm: |
|
yes,ftra e/w(271,272and goltv |
New member Username: Coolsat70
Post Number: 4
Registered: Apr-06
|
| Posted on Monday, July 02, 2007 - 03:07 pm: |
|
Where can I donwload a channel list for a cool sat 4000 pro? |
Gold Member Username: Nydas
Post Number: 2958
Registered: Jun-06
|
| Posted on Monday, July 02, 2007 - 05:17 pm: |
|
Roberto :
http://www.f2atv.com
http://www.future-fta.com
http://www.dssevolution.com
http://www.dsstester*com
All above except dsstester site, require registration, which is free. |
New member Username: Gerri
Post Number: 1
Registered: Jul-07
|
| Posted on Monday, July 02, 2007 - 10:32 pm: |
|
How do I unlock my viewsat ultra? |
New member Username: Kryptor
Post Number: 5
Registered: Jul-07
|
| Posted on Tuesday, July 03, 2007 - 08:19 pm: |
|
DssWorld is back, too. Thanks a lot, AV! |
Gold Member Username: Nydas
Post Number: 2975
Registered: Jun-06
|
| Posted on Wednesday, July 04, 2007 - 09:54 am: |
|
I am going to be away for a week's holiday and am unlikely to have access to Internet. If you have questions, please post them open for anybody to answer. |
New member Username: Mr_confused
Post Number: 1
Registered: Jul-07
|
| Posted on Wednesday, July 04, 2007 - 10:46 am: |
|
can someone tell me how to program codes into a captiveworks 600 premium |
New member Username: Mr_confused
Post Number: 2
Registered: Jul-07
|
| Posted on Wednesday, July 04, 2007 - 10:46 am: |
|
can someone tell me how to program codes into a captiveworks 600 premium |
New member Username: Mr_confused
Post Number: 3
Registered: Jul-07
|
| Posted on Wednesday, July 04, 2007 - 10:50 am: |
|
can someone tell me how to program codes into a captiveworks 600 premium |
Silver Member Username: Therepo
Ftaview.com
Post Number: 118
Registered: May-07
|
| Posted on Wednesday, July 04, 2007 - 11:05 am: |
|
Jeff:
Here's what you'll need:
Null modem cable (probably got one with your receiver)
Loader v1.06 or v1.05 (you can use either) Latest bin (currently v1.42)
(download these from a fta site.)
Here's what you do:
1. Download loader and bin to your computer. Unzip the bin and copy it to somewhere you can find it easily when browsing from your loader.
2. With the receiver turned off on the rear switch, connect it to your computer via the null cable.
3. Put your machine into either (a) STANDBY or (b) BOOT mode (you can load it either way).
(a) To get it to STANDBY mode, turn the receiver's rear switch ON, and when you see 00:00 on the display, turn OFF using the FRONT button; you will then see --:-- (STANDBY).
(b) To get to BOOT mode, hold the front power button, and turn the rear switch ON; you will see "boot" displayed.
4. Open the loader and browse for the bin where you saved it unzipped. Select it and click start.
5. Wait until you see "end", then you can power off the receiver and disconnect from computer.
You have successfully upgraded your software!
-------------
Now to scan for channels!
Hook your receiver up to your TV and connect the coaxial cable from your dish(es) to the LNB IN connector. When you first turn it on, it will take you through an few automated setup procedures, like language choice, and so on.
Now if you were to go into the menu>installation>antenna setup, and try to chose your sats, you may notice they are all screwed up, and trying to chose them will cause the receiver to reboot. You must first of all do a factory default. Go to menu>installation>factory default. You will now be able to chose your satellites and setup values. switches, etc.
You can setup the values for each sat separately if you wish, and scan each. However, the easiest way, especially for a first time user, is to simply go to menu>installation>easy tuning. You can use the down button to navigate between fields, and the right/left to select the desired value/sat/switch. You can use easy tuning to scan your channels if you have only one LNB, or if you have up to 4. A typical screen for 4 sats might look like this after you've chosen the desired values:
Status Satellite Diseqc LNB freq
ON----- Echo 7----- 1----- 11250
ON----- Echo 8,10-- 2----- 11250
ON----- Nimiq 1,3-- 3----- 11250
ON----- Nimiq 2---- 4----- 11250
Any ports you don't use, just set the status to OFF.
Now press OK and choose either FAST TUNING or AUTO TUNING to scan your sat(s). Fast tuning uses preconfigured tp/channel data, while auto tuning actively also looks for new data; it is recommended you use AUTO TUNING.
Note: at this time it appears that scanning multiple satellites renders a number of EPG channels listings as "prog xxxx" (where xxxx is the number of the channel) rather than the proper channel name or abbreviation. It is best then to simply autoscan (red button) each sat separately. You can do this from the easy tuning menu or the installation menu. After one scans in, just change the sat name to the next one you want to scan, make sure other settings are correct, and scan.
After your receiver finishes scanning, exit menus and go to any channel. Now you will perform the final step: enabling the patch (the top secret function that allows you to watch scrambled channels!).
Press F1
You will see "H"
Input "000"
The patch is now enabled!
Now just sit on a scramble channel and wait for the autoroll function to grab the active key. If you have both DN and Bev sats, you will need to go to a channel for each to await autoroll (remember Bev takes a little longer, six minutes or more). You will see it grabbing the keys, wait for it to grab both sets; reboot unit if necessary if it remains scrambled after grabbing the keys, or if audio is not present.
Now open a beer and watch TV! |
Bronze Member Username: Lichmc
Post Number: 26
Registered: May-06
|
| Posted on Wednesday, July 04, 2007 - 11:55 am: |
|
Reply for: "I have a pansat 3500 sd, and the latest keys (6/26) and I cant see the world!!! is it time for a new bin?"
*****************
just turn off and on; or unplug your receiver
keys havent changed |
New member Username: Rosyg
Post Number: 3
Registered: Apr-07
|
| Posted on Wednesday, July 04, 2007 - 01:09 pm: |
|
Nalin, Have a wonderful and very well deserved vacation... God Bless You.
Rosie |
New member Username: Poochi425
Mis,
On
Post Number: 10
Registered: Feb-07
|
| Posted on Wednesday, July 04, 2007 - 11:44 pm: |
|
is anybody having problems with BEV nimiq 2KU 82.0 W ??
any news about key change???
i tried both keys listed as of june 13th but nothing works, still no picture.
plz. help |
Bronze Member Username: Chechi
Post Number: 26
Registered: Apr-06
|
| Posted on Thursday, July 05, 2007 - 02:05 pm: |
|
Where can I can find the latest Bin, for my new pansat 2500 clone?
Thank you. |
New member Username: Coolsat70
Post Number: 5
Registered: Apr-06
|
| Posted on Thursday, July 05, 2007 - 06:22 pm: |
|
How can I enter keys in a Fortec star platinum ? |
Bronze Member Username: Evilnip
Winnipeg,
Manitoba
Canada
Post Number: 29
Registered: Oct-06
|
| Posted on Thursday, July 05, 2007 - 11:33 pm: |
|
can someone please help me,i have a pansat 2500,new keys as of june 26th,but i 've lost the first set of channels,no usa net,court tv,history channel etc.i tried a blind scan,tp scan,but still nothing,anyone know what the problem is? |
New member Username: Jaydeeeee
Post Number: 1
Registered: Jul-07
|
| Posted on Friday, July 06, 2007 - 03:09 am: |
|
Can someone tell me what happened to my lifetime. I keep it on all the time and this morning i go look at it and it doesnt turn on anymore. No lights come on but i her a clike sound when i turn it on and off from the back. I haven't changed bins or done anything to this box for months. Is there a fix for it or is it time to change it. |
