Archive through May 06, 2007

Gold Member

Username: Nydas

Post Number: 2440
Registered: Jun-06

Posted on Monday, April 23, 2007 - 10:07 pm:

aa: With the 289T BIN you will get serious key morphing problems. Every time the signal is low, the reciever will go into a search and that is when the key morphing occurs. You must make sure that the autoroll is off. If you want to continue entering keys manually, use 288T. The latest BIN 293T is reasonably good and the autoroll works.

emile chag

New member

Username: Eecco

Post Number: 5
Registered: Feb-07

Posted on Tuesday, April 24, 2007 - 12:10 pm:

is DN down

Gold Member

Username: Nydas

Post Number: 2450
Registered: Jun-06

Posted on Tuesday, April 24, 2007 - 12:41 pm:

emile chag:DN keys have not changed. If you have an older BIN, there is key morphing going on and will affect you.
1. Switch off at back and switch on after 30-40 seconds.
2. Check all the numbers in both the keys to make sure you have the right keys.

lookekhoshshans

New member

Username: Lookekhoshshans_1356

Tehran, Tehran
Iran

Post Number: 7
Registered: Apr-07

Posted on Tuesday, April 24, 2007 - 01:31 pm:

Hi all
Iam new here and how can help me?
I download autoroll 295 and 294 they didnot work with Ariza 700.
any one have sites to download autoroll for Ariza 700 ? thanks alots bye.

Monica

Bronze Member

Username: Ariana_70

Sorel-Tracy, Quebec
Canada

Post Number: 94
Registered: Aug-06

Posted on Tuesday, April 24, 2007 - 02:20 pm:

DISH NETWORK

00
B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A

01
53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E

Bronze Member

Username: Amrit187

Post Number: 43
Registered: Jun-06

Posted on Tuesday, April 24, 2007 - 04:11 pm:

where can i get the 293t bin for pansat 2500a
?

abbas

New member

Username: Abbasusa77

Post Number: 1
Registered: Apr-07

Posted on Tuesday, April 24, 2007 - 05:53 pm:

hi there i am new to this side i am having prob with my panset 2007a i am entering all the time new key its ok for 5 mint then its switching to old number my mean to old key i have to re enter all the time i dont know whats wrong can some one help me out here plz

Gold Member

Username: Nydas

Post Number: 2455
Registered: Jun-06

Posted on Tuesday, April 24, 2007 - 07:56 pm:

lookekhoshshans and aa :
Pansat 2500A and clones.
Cable: Straight RS232 DB9 F/F
Uploader: BL upodater 1.4
BIN 293T
Sites as follows:
http://www.dssrookie.com
http://www.future-fta.info
http://www.totalfta.com
http://www.dssevolution.com

Gold Member

Username: Nydas

Post Number: 2456
Registered: Jun-06

Posted on Tuesday, April 24, 2007 - 07:57 pm:

abbas : You need to upgrade to Bott B75 and BIN 203.
Look at the Pansat 2700 secion in the above recommended sites or others of your choice.

joe vujevich

New member

Username: 9999

Post Number: 5
Registered: Apr-07

Posted on Tuesday, April 24, 2007 - 10:17 pm:

Hi, to all
where can I found blacklist uploader 1.4?
Thanks to all

Gold Member

Username: Nydas

Post Number: 2460
Registered: Jun-06

Posted on Tuesday, April 24, 2007 - 10:41 pm:

joe vujevich : Just a couple of posts above are posted URLs to four sites. Go there, and register, then go into Pantec or Pansat section or to the Fortec Ultra section and find the BL updater 1.4

joe vujevich

New member

Username: 9999

Post Number: 6
Registered: Apr-07

Posted on Tuesday, April 24, 2007 - 10:51 pm:

Thank you Nalin

abbas

New member

Username: Abbasusa77

Post Number: 2
Registered: Apr-07

Posted on Wednesday, April 25, 2007 - 11:10 am:

thank you Nalin. i have one more Q plz how can i Bott B75 and BIN 203. in my panset 2700a can plz let me know i relay appreciate that u help me thank you and plz let me now take care

Gold Member

Username: Nydas

Post Number: 2466
Registered: Jun-06

Posted on Wednesday, April 25, 2007 - 11:24 am:

abbas :
First of all, you must know that it is a genuine Pansat 2700A and not a clone. The following applies only to the genuine product.
Few more changes than a normal BIN sustitute have taken place in Pansat 2700A/E. You will need to first install a B75 Boot and then a BIN 203 on top of it. The instructions are very precise and have to be followed precisely.
Go to Pansat 2700 section of
http://www.al7bat*tk
for more details and the files. Good information is also available at other sites such as
http://www.future-fta.info
http://www.totalfta.com
http://www.dssrookie.com

and many more. Note that the Loader has also changed. Downloaded files should always be unzipped before using. You will need a null modem cable.

Gold Member

Username: Nydas

Post Number: 2468
Registered: Jun-06

Posted on Wednesday, April 25, 2007 - 11:28 am:

abbas:
Pansat-C 2700 203v1 Tivo
is probably a better choice than the original 203 BIN for 2700A

D F

Bronze Member

Username: Curler

Post Number: 31
Registered: Mar-07

Posted on Wednesday, April 25, 2007 - 05:50 pm:

Bell ExpressVu (Last Update: 2007/04/25 6:43 AM PDT)

86: CE 00 87 8F 4D 75 37 9F 3E 97 06 B0 C9 8C D0 A4
96: C7 8A B8 CF AD 48 CF 75 CA 1B 8A 43 D4 AA AA CC

adam c

Bronze Member

Username: Adamiscool

Post Number: 30
Registered: May-06

Posted on Wednesday, April 25, 2007 - 09:49 pm:

heyy every1, i jsut bought a sonic view 4000, and i was playin around and i didnt know how to put in the keys with the remote, so i was wondering if some1 could post it on how to put in the keys manually with the remote

Gold Member

Username: Nydas

Post Number: 2486
Registered: Jun-06

Posted on Wednesday, April 25, 2007 - 10:55 pm:

Sonicview 1000/4000. Key entry

1. Using your remote, do menu>entertainment
2. You will not see word "CODE". You will only see some names of games.
DO NOT PRESS OK.
3. Enter 7890 and you will see the word "CODE"
4. Press OK. You will now see key entry screen
5. Scroll to nagravision down one
6. Go down one and right scroll to DN 0001.
7. Scroll down to enter keys using your remote:
10/11 for Key 00 and
20/21 for Key 01
8. Save.
9. Go up and select provider ID 0101 and repeat step 6 to 8.
10. If you are entering BEV keys scroll to provider ID 0800, do step 6 to 8,
then scroll to 0901 and do the same.
11 Exit

Bob Evans

New member

Username: Bobevans

Post Number: 6
Registered: Apr-07

Posted on Thursday, April 26, 2007 - 12:28 am:

Got Furniture?
http://www.sleekspace.com

Angie

Bronze Member

Username: Angie_wedgewood

Post Number: 52
Registered: Jan-07

Posted on Thursday, April 26, 2007 - 02:50 pm:

Bev Key Change April 26th/07

Key 0: 6B73F5772AD24B8958FC76ED0108E19F <--Active
Key 1: C78AB8CFAD48CF75CA1B8A43D4AAAACC

lookekhoshshans

New member

Username: Lookekhoshshans_1356

Tehran, Tehran
Iran

Post Number: 8
Registered: Apr-07

Posted on Thursday, April 26, 2007 - 04:34 pm:

hi Nalin Nyda
Thank you somuch and your very help ful.
I went and download autoroll 295,294and 293 .
They do not work with Ariza 700.
293 work only T_5/ku bout not work with Echo110
Thank you very much.
bye

Gold Member

Username: Lklives

Post Number: 9159
Registered: Jan-06

Posted on Thursday, April 26, 2007 - 05:39 pm:

Use the follow instructions below to enter the new keys in your Sonicview 1000 manually:

The instructions are the same for DISH (0101) & BEV (0901)

If you are using Keymaster , Key00 is key86 (Lines 10 & 11) and key01 is key96 (Lines 20 & 21)

1) Press MENU, <system> <user> and turn Autoroll to "OFF"

2) Press EXIT

3) Press right arrow to <entertainment> and press 7890

4) A CODE option will appear, press OK

5) Press the right arrow until you get to CAS <nagravision>

6) Press the down arrow to the sat line. Press right arrow until you get to your desired sat

DISH <01> or BEV <09>

7) key00 is active, highlight line number "10" then press the right arrow and start entering the keys (first 8 sets of digits)
example: 1C 3A 29 13 61 5E C6 21

Now highlight line number "11" then press the right arrow and start entering the keys (second 8 sets of digits)
example: C3 41 2A 31 5C 2B CD A1

If key01 was active, you would highlight line number "20" then press the right arrow and start entering the keys (first 8 sets of digits)
example: 21 A4 C4 23 40 AC 1B 3A

Now highlight line number "21" then press the right arrow and start entering the keys (second 8 sets of digits)
example: 11 C2 41 A1 6D 2D 33 22

9) Press EXIT - Click "OK" on "YES" to save the changes

NOTE: The example keys are just that, examples

The active key is key00,

Edit (Line 10) 1C 3A 29 13 61 5E C6 21
(Line 11) C3 41 2A 31 5C 2B CD A1

If the active key was key01,

We would have edited (Line 20) 21 A4 C4 23 40 AC 1B 3A
(Line 21) 11 C2 41 A1 6D 2D 33 22

ONLY the active keys have to be changed, if you prefer to change both sets of keys, go right ahead.

JPZ

Silver Member

Username: Jpz

MTL, QC
CAnada

Post Number: 198
Registered: Jun-06

Posted on Thursday, April 26, 2007 - 08:18 pm:

Hi. Some of the channels are disapearing !! is it my receiver or any one have this problem ??

abbas

New member

Username: Abbasusa77

Post Number: 3
Registered: Apr-07

Posted on Thursday, April 26, 2007 - 09:03 pm:

hi there my panset not getting any channel all its say SCRAMBLED OR BAD CHANNEL on all the channel is any one els having prob like this plz let me know i enter all new key to still i am having prob

Gold Member

Username: Nydas

Post Number: 2502
Registered: Jun-06

Posted on Thursday, April 26, 2007 - 10:34 pm:

Abbas: I warned you that the new Boot and BIN for Pansat 2700A is a bit tricky. You could try and load the 203V tivo and see if you are more successful.

Gold Member

Username: Nydas

Post Number: 2503
Registered: Jun-06

Posted on Thursday, April 26, 2007 - 10:37 pm:

JPZ: The receivers are working well with th latest BINs. There are occasional glitches. If you are only watching DN, you might be better off turning the autoroll off. BEV keys are changing too often so best to keep autoroll on for BEV if you are scanning BEV.
Always try the old trick of turning off at the back of receiver and turning on again after 30-40 seconds.

johnson pathmanathan

New member

Username: Johnsonp

Post Number: 1
Registered: Apr-07

Posted on Thursday, April 26, 2007 - 10:46 pm:

Can someone post the new dish network keys.
Thank you.

manhar patel

New member

Username: Manhar71

Post Number: 1
Registered: Apr-07

Posted on Friday, April 27, 2007 - 11:15 pm:

any one has a new dish network keys????

Gold Member

Username: Nydas

Post Number: 2508
Registered: Jun-06

Posted on Friday, April 27, 2007 - 11:44 pm:

Manhar Patel: DN keys have not changed. If you were seeing TV and it has just stopped, try switching off at the back and after 40 secodes switch it on. If you have not had TV for some days try installing a new BIN appropriate to your receiver.

John Anthony

New member

Username: Tankbukkake

Post Number: 2
Registered: Apr-07

Posted on Saturday, April 28, 2007 - 12:16 am:

About a week ago, i started losing my channels little by little. Ive put the newest keys, turnned of autoroll,and i even bought a new cable(from the satelite to the reciver)and still no luck.On some channels i get high signals but no picture and on others i get zero signal.The only thing i havent done is update the bin(i dont have the adaption)but i dont need to update it unless im putting the new keys right??? Well thanks alot in advance for any help you give me. ) Oh and ive also fooled around with the disq but no such luck

New member

Username: Cacalad

Post Number: 1
Registered: Apr-07

Posted on Saturday, April 28, 2007 - 10:07 am:

need the new keys please for dish

New member

Username: Cacalad

Post Number: 2
Registered: Apr-07

Posted on Saturday, April 28, 2007 - 10:16 am:

somebody help me please with the new keys

Atif Shamim

New member

Username: Aatifkhan

Post Number: 1
Registered: Nov-06

Posted on Saturday, April 28, 2007 - 12:54 pm:

I am using a Pansat 3000. I have turned on Tv after a few days and every thing seems to have gone away. I have no signal whatsoever despite having the right keys. I have turned autoroll off and tried switching off the box from back side with no luck. Is this a problem with the bin file? Can some body get me the link to the right software and procedure to download it? Can I try something else to restore it?

Gold Member

Username: Nydas

Post Number: 2511
Registered: Jun-06

Posted on Saturday, April 28, 2007 - 07:58 pm:

carolina: DN keys have not changed for several days. Turn switch off at back and on again after a minute. If not successfull, do set autoroll off, set default keys and enter keys manually.

Gold Member

Username: Nydas

Post Number: 2512
Registered: Jun-06

Posted on Saturday, April 28, 2007 - 07:59 pm:

John Anthony: Need info on the receiver type, current BIN, Satellites scanned etc.

John Anthony

New member

Username: Tankbukkake

Post Number: 4
Registered: Apr-07

Posted on Saturday, April 28, 2007 - 08:50 pm:

Nalin Nydia :-(

im kind of new at this) 2500 pansat,dont know curent bin, but i got it about 2months ago. I scanned sat echo 8,10 and 7. Iget high qualites on some channels but no pic.

Gold Member

Username: Nydas

Post Number: 2516
Registered: Jun-06

Posted on Saturday, April 28, 2007 - 08:56 pm:

John Anthony: I have given exact instructions in another thread you started

John Anthony

New member

Username: Tankbukkake

Post Number: 7
Registered: Apr-07

Posted on Saturday, April 28, 2007 - 09:15 pm:

where do i get 293t?

Gold Member

Username: Nydas

Post Number: 2522
Registered: Jun-06

Posted on Saturday, April 28, 2007 - 09:18 pm:

I have replied to John Anthony in another thread.

New member

Username: Cacalad

Post Number: 3
Registered: Apr-07

Posted on Saturday, April 28, 2007 - 11:27 pm:

nalin thank you for responding me but i did what you told me but still dont work if you can give me the keys you have ill put them and see if they work thank you carolina

Gold Member

Username: Lklives

Post Number: 9204
Registered: Jan-06

Posted on Sunday, April 29, 2007 - 12:56 am:

haji nada nalin..can't even get her own dildoe working nevermind somebody's FTA receiver!...she has ruined many people's receivers with her BAD advice...

Gold Member

Username: Nydas

Post Number: 2528
Registered: Jun-06

Posted on Sunday, April 29, 2007 - 09:26 am:

DN (Last Update: 2007/04/11)
Key 00 (86)::
B8 46 82 2D 29 B6 25 87
8C B1 63 15 24 65 0D 8A
Key 01 (96):
53 B1 5A D5 D0 FD 53 8C
6F 19 5F DE BF 78 80 8E

BEV (Last Update: 2007/04/26 )
Key 00 (86)::
6B 73 F5 77 2A D2 4B 89
58 FC 76 ED 01 08 E1 9F
Key 01 (96):
C7 8A B8 CF AD 48 CF 75
CA 1B 8A 43 D4 AA AA CC

bonita

Bronze Member

Username: Labonitafda

Montreal, Quebec
Canada

Post Number: 16
Registered: Nov-06

Posted on Sunday, April 29, 2007 - 11:40 am:

hi i have pansat 2700a original
how to get the portugaise radio RTP i have 101 degree

Lori

Bronze Member

Username: Lbinny1

Post Number: 34
Registered: Jun-06

Posted on Sunday, April 29, 2007 - 11:48 am:

can someone send me a link to the latest viewsat bin or where to download it besides totalfta.com. thank you.

eatfish

Silver Member

Username: Eatfish111

Post Number: 245
Registered: Dec-06

Posted on Sunday, April 29, 2007 - 11:56 am:

lori go to www.livefta.com

New member

Username: Cacalad

Post Number: 4
Registered: Apr-07

Posted on Sunday, April 29, 2007 - 12:05 pm:

thank you nalin they worked

Gold Member

Username: Nydas

Post Number: 2532
Registered: Jun-06

Posted on Sunday, April 29, 2007 - 12:40 pm:

LK: Do not refer to me as a Haji. Haji is reserved for Muslims who have done pilgrimage to Mecca. I am neither a Muslim nor a Haji. With your paranoia, it is quite possible that you think by going to a Muslim country you have become a Haji. Nothing can be further to truth. You have to beleive in Islam, have a right mind set of righteousness and then go for the pilgrimage to Mecca.

For the Islamic people, it is the most sacred thing in life they can do. By constanly hurling abuse and profanity at me and calling me a Haji at the same time, you are insulting the whole of the Islamic readership of this forum.

Vic

New member

Username: Vknike

Post Number: 5
Registered: Jun-06

Posted on Sunday, April 29, 2007 - 03:15 pm:

Need new keys, last keys posted are old.

lookekhoshshans

New member

Username: Lookekhoshshans_1356

Tehran, Tehran
Iran

Post Number: 10
Registered: Apr-07

Posted on Sunday, April 29, 2007 - 05:07 pm:

Hi all
Iam new here and how can help me? before i download autoroll 292this only can show T_5KUBut not Echo8.110
I download autoroll 295, 294 and 293they didnot work with Ariza 700.
any one have sites to download autoroll for Ariza 700 ?please help. thanks alots bye

Nasir

Bronze Member

Username: Shhh

Post Number: 18
Registered: Feb-07

Posted on Monday, April 30, 2007 - 05:34 pm:

I have tried 3/21/07 bin for Lifetime Fortec Classic NA but still not working. Anyone knows if there is a new bin for Multistar Lifetime classic NA yet?

Tahir

Bronze Member

Username: Fulali

Post Number: 25
Registered: Sep-06

Posted on Monday, April 30, 2007 - 10:05 pm:

Sorry to post my problem in this forum but I believe this is most read and answered forum. My Ariza 700 is freeze and it is displaying only 8.8.8.8. No button on receiver and remote is working. I tried to hard boot it by turning power off/on from back switch but when display come back it is same. Do I need to do jtag it? If yes then from where I can find related files and how to guide? Please help me.
Thanks

annspring

New member

Username: Candy1

Post Number: 8
Registered: Oct-06

Posted on Monday, April 30, 2007 - 11:07 pm:

hi can someone help me please! When i put in 01 keys it works for 5 min then it will go back to 00 how can i get 01 to stay in?

juan lopez

New member

Username: Chico_58

Post Number: 1
Registered: May-07

Posted on Tuesday, May 01, 2007 - 01:16 am:

need new keys can someone help?

satguy

Bronze Member

Username: Dishall

Post Number: 25
Registered: Dec-05

Posted on Tuesday, May 01, 2007 - 09:21 am:

please any one has new dn keys.

Silver Member

Username: Bertoro

Toronto, Ontario
Canada

Post Number: 525
Registered: Apr-05

Posted on Tuesday, May 01, 2007 - 09:32 am:

Dish Provider 0101: Last Updated (April 13 6:00pm EST)

Key 0: B8 46 82 2D 29 B6 25 87 8C B1 63 15 24 65 0D 8A

Key 1: 53 B1 5A D5 D0 FD 53 8C 6F 19 5F DE BF 78 80 8E (active)

Bev Provider 0901: Last Updated (26 Apr '07 3:20 PM EST)

Key 0: 6B 73 F5 77 2A D2 4B 89 58 FC 76 ED 01 08 E1 9F (Active)

Key 1: C7 8A B8 CF AD 48 CF 75 CA 1B 8A 43 D4 AA AA CC

Silver Member

Username: Bertoro

Toronto, Ontario
Canada

Post Number: 526
Registered: Apr-05

Posted on Tuesday, May 01, 2007 - 09:34 am:

there are no new keys..!!!!
tv working fine..with keys posted

satguy

Bronze Member

Username: Dishall

Post Number: 26
Registered: Dec-05

Posted on Tuesday, May 01, 2007 - 09:36 am:

those are old dn has new keys on apr. 30 and i put new keys still no picture only percentage my autoroll is off. any help, these are new keys

D!SH Last Update: 04/30/07 10:06 pm

00: B846822D29B625878CB1631524650D8A
01: 53B15AD5D0FD538C6F195FDEBF78808E

Silver Member

Username: Bertoro

Toronto, Ontario
Canada

Post Number: 527
Registered: Apr-05

Posted on Tuesday, May 01, 2007 - 10:27 am:

ok satguy...good luck..
so u have new keys eh? cuz u say ..i put new keys still no pic....
i'll keep watching..you keep looking for keys

Gold Member

Username: Nydas

Post Number: 2533
Registered: Jun-06

Posted on Tuesday, May 01, 2007 - 11:39 am:

lookekhoshshans : It seems you are confused. You have the receiver working with BIN 292, i.e. at shows at least one satellite in the Menu. After loading the latest Ariza BIN, what do you see? Can you go into the Menu? If you do not see names of other Sats you can add them to the list.
It is important you tell us, what you see when go into Menu and Installation, and other operations.
Forget about autoroll for the time being and do Manual Key entry.

Gold Member

Username: Nydas

Post Number: 2534
Registered: Jun-06

Posted on Tuesday, May 01, 2007 - 11:45 am:

Tahir : You need to Jtag. Go to one of the following sites and learn from there. It is a complicated process. Just to get the equipment may cost you over $50.
http://www.dssrookie.com
http://www.totalfta.com
http://www.dssevolution.com
http://www.al7bar*tk

Ariza 700 is not well supported and is on the way out. You should consider a new receiver.
If budget is a consideration, Captive Works 600P is avaialble for under US $100. Other good receivers are Sonicview 1000 or 4000 and Viewsat Ultra.

Gold Member

Username: Nydas

Post Number: 2535
Registered: Jun-06

Posted on Tuesday, May 01, 2007 - 11:57 am:

There are NO new DN keys. I am confirming that the keys as posted by ferenck massella are working fine.
If you are not getting a picture, one of the first thing you should do is to switch off at the back and switch on after 30 seconds.
Some people are getting key morphing problem (see
annspring's post above). You can get out of this problems by
1. Turn auto roll off
2. Do set default keys.
3. Enter manually both Key 00 and Key 01 for either DN and/or BEV.
4. then do switch off/on.

Do not forget to set correct date, time and time zone.

Silver Member

Username: Bertoro

Toronto, Ontario
Canada

Post Number: 528
Registered: Apr-05

Posted on Tuesday, May 01, 2007 - 12:15 pm:

thanks Nalin !!!!!!!

satguy

Bronze Member

Username: Dishall

Post Number: 27
Registered: Dec-05

Posted on Tuesday, May 01, 2007 - 12:37 pm:

i have two pansat 2700, on has bin 295 and with latest keys of dn no picture and the second pansat 2700 with bin 203 is working with new keys, that i found .

New member

Username: Mac05

Post Number: 3
Registered: May-07

Posted on Tuesday, May 01, 2007 - 02:40 pm:

does anyone have new keys that works

Silver Member

Username: Bertoro

Toronto, Ontario
Canada

Post Number: 535
Registered: Apr-05

Posted on Tuesday, May 01, 2007 - 02:47 pm:

not again..!!!!!!!!

New member

Username: Mac05

Post Number: 4
Registered: May-07

Posted on Tuesday, May 01, 2007 - 02:59 pm:

not again or not yet

Silver Member

Username: Bertoro

Toronto, Ontario
Canada

Post Number: 536
Registered: Apr-05

Posted on Tuesday, May 01, 2007 - 03:15 pm:

read the previous posts.....

New member

Username: Mac05

Post Number: 6
Registered: May-07

Posted on Tuesday, May 01, 2007 - 03:27 pm:

OK but big things are happen this weekend and
that looks like a temp fix.

Gold Member

Username: Nydas

Post Number: 2543
Registered: Jun-06

Posted on Tuesday, May 01, 2007 - 03:34 pm:

Ban Cck : Nothing has happened to disrupt DN viewing, in the last few hours or few days. Read the posts above and get yourself sorted out with the latest BIN. THE KEYS HAVE NOT CHANGED

New member

Username: Mac05

Post Number: 7
Registered: May-07

Posted on Tuesday, May 01, 2007 - 03:48 pm:

OK thanks Nalin

JPZ

Silver Member

Username: Jpz

MTL, QC
CAnada

Post Number: 199
Registered: Jun-06

Posted on Tuesday, May 01, 2007 - 08:53 pm:

Hi guys !!!!!!!!!

Bronze Member

Username: Tonytoy

Post Number: 15
Registered: May-06

Posted on Wednesday, May 02, 2007 - 12:02 am:

Nice JPZ. I like the way you greet all members. It is a nice way to remember others, whether you need help with satellite probelms or not.

blamo bill

New member

Username: Supasharp

Post Number: 2
Registered: May-07

Posted on Wednesday, May 02, 2007 - 04:45 pm:

I found another website that list the latest keys, as many times when the keys change i am unable to load any site as they are all bogged down

http://tvftakeys.info

D.P.

New member

Username: Outback901

Post Number: 9
Registered: Jan-06

Posted on Thursday, May 03, 2007 - 09:15 am:

hi, looking for the new keys for the pansat

thank you.