| Author |
Thread: Anyone missing HBO-E |
    
Bronze Member Username: Hawks134
Post Number: 31
Registered: Jan-06
|
| Posted on Sunday, June 11, 2006 - 12:39 pm: |
|
I have a Pansat 2500A on 110/119 and I am missing HBO-E. Any help? |
|
|
|
Bronze Member Username: Nickb
New York,
New York
USA
Post Number: 25
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 02:26 pm: |
|
Umm..I\\'m using FLU and HBOE is working...but I had problem similar to that...one channel going bad or scrambled.
I just turned it off and reloaded the epg again and it worked. |
Bronze Member Username: Hawks134
Post Number: 32
Registered: Jan-06
|
| Posted on Sunday, June 11, 2006 - 02:28 pm: |
|
When I Sat Scan, it did not even show up. |
Bronze Member Username: Gsj
Post Number: 30
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 02:34 pm: |
|
help me
have ariza700 reciever, i download new bin and i set up sat 61.5 and 119 and scan (because i did factory setting before) after scan both sats i got some of the channles around 150 channels working good,
but i didn't get all channelslike ppv, disney, hbo,ect, i scanned double but i didn't more channels.
how i get other channels? anybody help me please??? |
Bronze Member Username: Nickb
New York,
New York
USA
Post Number: 27
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 02:44 pm: |
|
I just did a quick TP scan for echo 7 transponder 2 and HBOE is showing up in my scan and it seems to be working fine.
I\\'m not sure why doesnt show up in yours. :S |
Bronze Member Username: Tinfish
Post Number: 30
Registered: Apr-06
|
| Posted on Sunday, June 11, 2006 - 02:49 pm: |
|
nick..is the new bin available for FLU? |
Bronze Member Username: Gsj
Post Number: 31
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 02:57 pm: |
|
hi nick
can u please explain me how u did scan all
i tried but i got only some channles like indian, some chinees not english ppv xxx and others. help me |
Bronze Member Username: Nickb
New York,
New York
USA
Post Number: 29
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 03:01 pm: |
|
The 277T bin is the one I am using...and I think it is clone safe...so it can be used safely for FLU.
I have been running it since yesterday evening and it is working.
here the link to the file...
http://www.hostclip.com/dl/5f1d674748891253245e2ab47f711f31 |
Bronze Member Username: Gsj
Post Number: 32
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 03:14 pm: |
|
i am using 277e latest downloaded yesterday from dsstester for ariza 700
my channels working very good but i didn't get all channels |
Bronze Member Username: Hawks134
Post Number: 33
Registered: Jan-06
|
| Posted on Sunday, June 11, 2006 - 03:17 pm: |
|
Do you think I should keep doing TP scans until it shows up? |
Bronze Member Username: Nickb
New York,
New York
USA
Post Number: 30
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 03:25 pm: |
|
Hey Gary...
Well I not sure for the Ariza 700 but this is what I did for FLU...
Menu > Installation > Antenna Setup...and select the ones you are using...I\\'m using Echo 7 and 8.6
Just use right (volume up key) to select it.
Then..
Menu > Installation > Blind Scan...then I selected both Echo 7 and 8.6 by using right (volume up key)
and ok to scan...and it usually takes a little while...like 5 mins or so...
I don\\'t think I am missing any channels and PPVs and those affected by that ecm are working now.
BUT...that is for Fortec Lifetime Ultra..I haven\\'t used the Ariza before...so I am not sure if the steps are the same. |
Bronze Member Username: Nickb
New York,
New York
USA
Post Number: 31
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 03:30 pm: |
|
Ted Bone...
HBOE doesn\\'t show up on your scans at all?
I don\\'t know why that would be.
Like I just did that TP scan to check and when I scanned Echo 7 TP2 ..HBOE does show up..
Ummm I am not sure why it\\'s not working..
Might need someone who knows a bit more to help with this problem... |
Bronze Member Username: Gsj
Post Number: 33
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 03:37 pm: |
|
i did as
menu > intallation >antenna setup and select echo 7. echo 3 one by one
then store this and exit then choose power scan
and same as echo 3,
i got only 195 channels. |
Bronze Member Username: Nickb
New York,
New York
USA
Post Number: 33
Registered: May-06
|
| Posted on Sunday, June 11, 2006 - 04:03 pm: |
|
Hmmmm...I don\'t know why only 195 channels are showing up..
When I did my blind scan these were my settings..
Satellite Echo 7/KU
Degree 119.0W
LNB Config 11250
Symbol range Full
Polarity All
Scan All
Satellite Echo 8.6/KU
Degree 110.0W
LNB Config 11250
Symbol range Full
Polarity All
Scan All
And it scanned in all the channels. |
Bronze Member Username: Hawks134
Post Number: 34
Registered: Jan-06
|
| Posted on Sunday, June 11, 2006 - 04:18 pm: |
|
It is the only channel i am missing. |
