| Author |
Thread: Sat only at 22% |
    
New member Username: Lgs500
Nyc
Post Number: 3
Registered: May-06
|
| Posted on Saturday, June 10, 2006 - 05:28 pm: |
|
I uploaded the new bin from ds*tester.com for my pansat 2700a. I entered the same codes which were working a couple of days ago.. I followed the instructions eva diaz posted, however after doing satellite scan my receiver can't pick up any transponders? how do i fix this? thanks in advance |
|
|
|
Bronze Member Username: Cybercubi
Post Number: 18
Registered: Mar-06
|
| Posted on Saturday, June 10, 2006 - 05:33 pm: |
|
luis-
Are you using a stationary dish or motorized? Did you set the correct diseqc setting? did you scan for ALL and not just FTA? |
New member Username: Lgs500
Nyc
Post Number: 4
Registered: May-06
|
| Posted on Saturday, June 10, 2006 - 05:36 pm: |
|
i have a stationary, as far as the correct diseqc setting, i apoligize i'm not sure how to set that.....i did scan for all, can u show me how to set it correctly, thanks bro |
Bronze Member Username: Cybercubi
Post Number: 20
Registered: Mar-06
|
| Posted on Saturday, June 10, 2006 - 05:42 pm: |
|
Well, I think you just go to Menu and look for a Antena Setup option, which should then take you to the antena options, and diseqc is one of them (not too sure how pansat menu is configured). But are you using a diseqc switch? I mean do you have more than one LNB connected to the receiver? |
New member Username: Lgs500
Nyc
Post Number: 6
Registered: May-06
|
| Posted on Saturday, June 10, 2006 - 05:47 pm: |
|
yes |
Bronze Member Username: Cybercubi
Post Number: 21
Registered: Mar-06
|
| Posted on Saturday, June 10, 2006 - 06:08 pm: |
|
Ok, well I have no idea about your setup, although I think you just need to set the correct diseqc for the bird you are scanning; so check your cables coming from your lnb's and see which port of the diseqc switch they go into.. if you have a dual lnb DN setup, then the lnb to the left (as you stand behind the dish) is for 119, and the one to the right is for the 110 bird. So then set the correct diseqc port number in your Menu... Let me know if your setup is diff... |
Bronze Member Username: Hawks134
Post Number: 35
Registered: Jan-06
|
| Posted on Sunday, June 11, 2006 - 05:14 pm: |
|
Which diseqc should it be on for the dual DN setup? |
|
