Home > Message Board > Home Video > Rear Projection TVs > Archive through March 02, 2006 > Magnavox flashing screen problem-plea...
Main Topics Main Topics   Your Account Your Account Search Search   Help/Instructions Help
Today's Posts Today's Posts | Last 3 Days Bookmark and Share
Author Thread: Magnavox flashing screen problem-please help!!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

New member
Username: Bryanbutler

Camano Island, WA
USA

Post Number: 1
Registered: Mar-06
Edit Post

I bought this tv from a second hand store for cheap and cleaned the crt's out, cause one of them had a bacteria growth in it. Got that fixed, but in the process of taking the crt's out, some fluid leaked onto the large signal board. Started making the screen do wierd things. So I tracked down one of the problems. Resistors at locations r304 and r404 on the large signal board were fried. The screen is stable now except for this white slow strobing effect I get on the screen. I looked down the crt's and all three are flashing at the same time. Is there a transistor or something connected to these resistors that needs to be replaced? The model number on the set is 6P5451C102. Philips, I believe, refers to this set as 6P5451C1. It is a 54 inch rear projection tv. At least that's what the part numbers are listed under. I was just going to replace the whole board, but it would cost me around 500 dollars. PLEASE HELP. I DON'T KNOW WERE ELSE TO GO!!!!!!
Topics | Last Day | Search | Formatting Tips | Terms | Rules | Help | Log out | Bookmark and Share
Home > Message Board > Home Video > Rear Projection TVs > Archive through March 02, 2006 > Magnavox flashing screen problem-plea... [ « Previous ] [ Next » ]