| Author |
Thread: Satellite Scan never completes |
    
New member Username: Raj909
Post Number: 4
Registered: Dec-05
|
| Posted on Sunday, December 25, 2005 - 08:25 am: |
|
I have a Pansat 2700A with 1 DirectTV dish set up for 61.5 and 1 Dish500 Dual LNB dish set up for 110/119. Satellite scan completes for 61.5 but never completes for 110 & 119. Keeps looping and stuck on 12xxx and percentage complete doesn’t move. Both dishes are connected to a Coolst 4x1 switch. I have set to Factory Setting and still no luck. Thanks
Here is my setup:
61.5
echo 3/ku
LNB Local-Freq = 11250
DiseqC = 1
Level = 79
Quality = 99
110
echo 8.6/ku
LNB Local-Freq = 11250
DiseqC = 2
Level = 79
Quality = 99
119
echo 7/ku
LNB Local-Freq = 11250
DiseqC = 3
Level = 79
Quality = 99 |
|
|
|
Silver Member Username: Hamtec
Post Number: 347
Registered: Jun-04
|
| Posted on Sunday, December 25, 2005 - 02:06 pm: |
|
do not set factory settings that will not help you.... Load bin and set default keys let it auto roll and all is good!!!!! |
No1b4us Unregistered guest |
| Posted on Sunday, December 25, 2005 - 09:05 pm: |
|
Run scan on each satellite separately, then hook up switch.
This is why. |
No1b4us Unregistered guest |
| Posted on Sunday, December 25, 2005 - 09:06 pm: |
|
Run scan on each satellite separately, then hook up switch.
This is why. |
No1b4us Unregistered guest |
| Posted on Sunday, December 25, 2005 - 09:09 pm: |
|
Run scan on each satellite separately, then hook up switch.
This is why. |
New member Username: Raj909
Post Number: 5
Registered: Dec-05
|
| Posted on Monday, December 26, 2005 - 08:53 pm: |
|
Thanks No1b4us, that did the trick! Much thanks. |
|
