| Author |
Thread: SOMETHIN' WEIRD HAPENIN' |
    
Bronze Member Username: Thechiz2
Mars,
Ur anis
Mine
Post Number: 19
Registered: Apr-05
|
| Posted on Thursday, June 09, 2005 - 07:25 pm: |
|
MY PANSAT IS ACTING UP ? OR NOT. GOT THE AUTO ROLL AND IT'S TAKING ALOT LONGER TO ROLL. THE KEYS ARE CHANGING I THINK IT WAS ABOUT 7:05 EASTERN. MAYBE THIS IS IT. I'VE TRIED TO REBOOT PANSAT 2500A THREE DIFFERANT TIMES AND IT DOWNLOADS SO MUCH AND JUST SITS THERE. ANYONE ELSE HAVING THE SAME ISSUE? |
|
|
|
New member Username: Vanmar
Nassau,
Bahamas
Bahamas
Post Number: 1
Registered: Jun-05
|
| Posted on Thursday, June 09, 2005 - 07:27 pm: |
|
Yes I am having the same problem |
New member Username: Vanmar
Nassau,
Bahamas
Bahamas
Post Number: 2
Registered: Jun-05
|
| Posted on Thursday, June 09, 2005 - 07:29 pm: |
|
can someboday help me with the new codes for the automatic roll over or just some codes |
jomajale Unregistered guest |
| Posted on Thursday, June 09, 2005 - 07:30 pm: |
|
I was having the same problem and I just changed the keys manually, and all is working now. |
|
| Posted on Thursday, June 09, 2005 - 07:33 pm: |
|
Dishnet is playing games...give the autoroll time,the keys will autoroll..it might take hours,which does happen on ocassion..autoroll works better on some channels than others.. |
papacito Unregistered guest |
| Posted on Thursday, June 09, 2005 - 07:34 pm: |
|
you are not alone, me too |
New member Username: Skinnyp
Post Number: 1
Registered: Dec-04
|
| Posted on Thursday, June 09, 2005 - 07:39 pm: |
|
what are the keys for manual adjustment! |
New member Username: Skinnyp
Post Number: 2
Registered: Dec-04
|
| Posted on Thursday, June 09, 2005 - 07:42 pm: |
|
jomajale - you had the same problem and you ended up changing keys manually - according to your message this works. |
New member Username: The_fisherman
Post Number: 10
Registered: Feb-05
|
| Posted on Thursday, June 09, 2005 - 07:45 pm: |
|
Well, I guess it's gone. I got it to quit autorolling and double checked the keys. All is well there but everything says "Scrambled or bad channel" I can't even get radio. So long Dishnet, been good to know ya. The Fisherman |
Dishviewer Unregistered guest |
| Posted on Thursday, June 09, 2005 - 07:47 pm: |
|
Need assistance! My auto-roll software on pansat2500a is not picking up the key as of today. It is just saying DATA IS BEING DOWNLOADED and stays at 540% so far.Any suggestions will help?I'm pretty sure they havent moved all the channels to N2 yet |
jomajale Unregistered guest |
| Posted on Thursday, June 09, 2005 - 07:48 pm: |
|
http://forum.ecoustics.com/bbs/messages/2/141277.html |
mi machuque Unregistered guest |
| Posted on Thursday, June 09, 2005 - 08:01 pm: |
|
patience my sons...........
it will all get back to normal with the autoroll bin you all have been using....
plus as soon as the moved is complete...
you all will be hearing very, very good news..
save up.......$ |
Bronze Member Username: Thechiz2
Mars,
Ur anis
Mine
Post Number: 21
Registered: Apr-05
|
| Posted on Thursday, June 09, 2005 - 08:02 pm: |
|
i manually added the keys still gets so far on the d/l then just sits there f**kin dicknet *ss holes |
Dishviewer Unregistered guest |
| Posted on Thursday, June 09, 2005 - 08:05 pm: |
|
Does the Manual Key Entry Work? |
|
| Posted on Thursday, June 09, 2005 - 08:06 pm: |
|
I manually added the keys and it works just fine.
I tried autorolling first and achieved anywhere from 20-107 percent. Just add them manually.
make sure you do it correctly, search these forums for instructions. |
Bronze Member Username: Thechiz2
Mars,
Ur anis
Mine
Post Number: 22
Registered: Apr-05
|
| Posted on Thursday, June 09, 2005 - 08:12 pm: |
|
what keys did u use? |
|
| Posted on Thursday, June 09, 2005 - 08:16 pm: |
|
All FTA autorolls,except the coo*lsat released last night, are down...Dish has done a minor ECM..atmega is also working..don't worry,nothing is broken or damaged...BUT new autoroll bins will be needed..
Just enter your keys manually
KEY1 D5 66 C4 72 AE D0 60 B7
If you cant get into your menu because your FTA box is frozen downloading the new key, just turn your receiver off, then on, then immediately go into your MENU screen.
Go to your Dish Network key enter screen and enter the above active key for Key 1
Thats it!! |
Bronze Member Username: Thechiz2
Mars,
Ur anis
Mine
Post Number: 23
Registered: Apr-05
|
| Posted on Thursday, June 09, 2005 - 08:23 pm: |
|
did it and it still locks up at a certian %. i know i'm entering them right. i don't know...... i'll f**k with it tomarrow i geuss. i still got cable. lol |
|
| Posted on Thursday, June 09, 2005 - 08:26 pm: |
|
LK: Cools* went down today, is there a new autoroll for it? If so where, been looking? |
|
| Posted on Thursday, June 09, 2005 - 08:35 pm: |
|
The latest coo*lsat bin released last night is the ONLY autoroll working on ANY receiver..dsscommunity has it..all other autoroll bins are NOT working..
COOLSAT4000_125_20050609.zip
(size: 703.1 KB last modified: 06-09-2005 )
New Coo*lsat Flash COOLSAT4000_125_20050609 |
leapfrog222 Unregistered guest |
| Posted on Thursday, June 09, 2005 - 08:36 pm: |
|
first time ive had any problems was today...i have autoroll also, manually entered the keys....working great now! |
Dishviewer Unregistered guest |
| Posted on Thursday, June 09, 2005 - 08:38 pm: |
|
The keys listed above work 100% . Good job guys!
Make sure you enter it right |
Bronze Member Username: Thechiz2
Mars,
Ur anis
Mine
Post Number: 24
Registered: Apr-05
|
| Posted on Thursday, June 09, 2005 - 08:52 pm: |
|
got it lk thnx. it went all the way to 1110% but yeagh... thnx |
|
| Posted on Thursday, June 09, 2005 - 08:58 pm: |
|
where can i get the coo*lsat autoroll that was released last night?> |
Fred W. Unregistered guest |
| Posted on Thursday, June 09, 2005 - 09:03 pm: |
|
with the new keys my fta works for awhile....but then it freezes........whats happening? thanks for any help |
New member Username: Sharpes84
Post Number: 5
Registered: Mar-05
|
| Posted on Thursday, June 09, 2005 - 09:23 pm: |
|
key work great tx!!!!!!!!!!!! |
louie c Unregistered guest |
| Posted on Thursday, June 09, 2005 - 09:29 pm: |
|
thanksssssss all you out there for the help..yep auto roll not working..manually but again thanks for you new code..where can I find it for furture problem>>> I think the Auto R. is out?? what do you think...again thanksssss B ball now... |
|
| Posted on Thursday, June 09, 2005 - 09:32 pm: |
|
has anyone else lost their signal strength and quality???? |
New member Username: Nightrider24
Post Number: 1
Registered: Jun-05
|
| Posted on Thursday, June 09, 2005 - 09:52 pm: |
|
Can anyone tell me how to enter the new code into the satelite receiver. New at this, thanks |
|
| Posted on Thursday, June 09, 2005 - 10:02 pm: |
|
Yep.........same crap happening here...... It froze up and I have no quality,strength with eko 7 ....... damn! I have an Ariza Ultra 500 and it had worked flawlessly until now. Anybody have the latest keys and how do I put them in this model? Thanks - Don |
|
| Posted on Friday, June 10, 2005 - 12:19 am: |
|
Please help
My Pansat is downloading % up to 720, then stuck right there, didn't move anything. What can I do. Please help. Appreciate. |
|
| Posted on Friday, June 10, 2005 - 08:14 am: |
|
The Coo*lsat file has a .stb tag instead of .bin . Is that OK to use? |
|
| Posted on Friday, June 10, 2005 - 03:08 pm: |
|
the pansat is down no more channels at all..I think it's the big black N2....the free ride is over..we all did pay for are equipment..so not rally free.. |
|
| Posted on Friday, June 10, 2005 - 03:25 pm: |
|
BOB...yes that co*olsat file posted above (at dsscommunity) works great..
clou1e and EVERONE..read the "Latest and Current keys" thread..its not N2 time yet...its Manual key changing time...and dishnet now has gotten into the autoroll bins..they no longer work! |
|
| Posted on Friday, June 10, 2005 - 05:58 pm: |
|
Hey, thanks LK you are right the code change did it.. roll over I guess is gone..do you know when the big N2 will hit us.. i heard in sept?? again thankssssssss |
|
| Posted on Friday, June 10, 2005 - 07:00 pm: |
|
Bev is 95% done now...Dishnet still looks like Sept.. |
