| Author |
Thread: Archive through April 25, 2005 |
    
Bronze Member Username: Hamtec
Post Number: 90
Registered: Jun-04
|
| Posted on Monday, April 18, 2005 - 10:43 pm: |
|
goto www.dssevolution.com and read till you can't read know more. There is lots of posts that will walk you throw the autoroll. |
|
Relevant Product Info
|
|
New member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 5
Registered: Apr-05
|
| Posted on Monday, April 18, 2005 - 10:49 pm: |
|
I'll try
Thank you |
dlamazing69 Unregistered guest |
| Posted on Monday, April 18, 2005 - 11:00 pm: |
|
i have quantum 3000 but i get alot of spanish chanels could my dish be pointing to bev and also need help to get a good chanel list evrytime i load it by searching for it shity chanels come out does it mater where u point it and u get difrent chanels list or what im kind of new at this ! |
Bronze Member Username: Hamtec
Post Number: 93
Registered: Jun-04
|
| Posted on Monday, April 18, 2005 - 11:03 pm: |
|
You must point dish to sat you want. |
dlamazing69 Unregistered guest |
| Posted on Monday, April 18, 2005 - 11:19 pm: |
|
and when i scan for chanels i get very lil am not getting all the chanels like am supoesd to dont know y have 99%signal on 110 119 can any 1 help plzzz |
Bronze Member Username: Hamtec
Post Number: 94
Registered: Jun-04
|
| Posted on Monday, April 18, 2005 - 11:25 pm: |
|
use the proper keys first of all and remember that lots of channels have gone to nagra 2. |
dlamazing69 Unregistered guest |
| Posted on Monday, April 18, 2005 - 11:39 pm: |
|
direct tv is alot better than this fta bullshit when are they gona hack dave any1 know ? |
Bronze Member Username: Hamtec
Post Number: 95
Registered: Jun-04
|
| Posted on Monday, April 18, 2005 - 11:40 pm: |
|
Dave is over. |
dlamazing69 Unregistered guest |
| Posted on Monday, April 18, 2005 - 11:42 pm: |
|
yah i know about nagra 2 but i get alil bit of chanels when i scan i only get 291 chan dont i have to get more and my key are fine they update them selves |
|
|
Bronze Member Username: Maple_leaf
Post Number: 26
Registered: Apr-05
|
| Posted on Monday, April 18, 2005 - 11:56 pm: |
|
They are not. DTV is gone. Oh and if your pointed at 91 it's french not spanish. |
Bronze Member Username: Hamtec
Post Number: 97
Registered: Jun-04
|
| Posted on Tuesday, April 19, 2005 - 12:03 am: |
|
thank maple leaf I have 2300 not sure about 2500. I was not sure of what sat he was pointing too but this is what this site is about. We just have to keep the idiot out of the loop here. |
Unregistered guest |
| Posted on Tuesday, April 19, 2005 - 12:31 am: |
|
HI all
I inputed the keys on my pansat 2500a and the keys work but some channels say bad or scrambled channel. The main channels that do this are tXsty, Ten and Private. there may be others but I havent seen them. Des anyone know how to fix this. It use to work fine so Im not sure whats up now.
Thanks in advance for any help. |
Bronze Member Username: Maple_leaf
Post Number: 28
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 12:36 am: |
|
Man you have got to keep up here they went n2. You won't get them any more right now. |
New member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 6
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 07:43 am: |
|
I instaled auto roll on my pansat2500a,but I didn't get any channel
and even the remote controle is freezed.
THE ONLY THING I GOT on my receiver is ON
The only thing I got on my tv.is languages.
I really need help
Thank you |
nice indian Unregistered guest |
| Posted on Tuesday, April 19, 2005 - 08:51 am: |
|
Anuone know how to get Indian Channels back if so please post it. BY the way there is one free preview hindi channel called FPCHL or FPCHN either one. They show hindi movies,songs about 2 hours twice. And pro cricket. Thanks for help in advance. PLEASE someone let me know if you get indian channels.
THANKS A BUNCH |
|
| Posted on Tuesday, April 19, 2005 - 10:20 am: |
|
dlamazing is not a true poster,I believe him to be kneegrow,asking redundant dumb questions that I have already answered and explained very simply to him in other threads here..nobody can be that ignorant and expect to remain in this hobby..its kneegrow and he's goofin on you all.. |
|
| Posted on Tuesday, April 19, 2005 - 10:44 am: |
|
Hello LK. It's good to know that my head will not be bitten off for asking perhaps dumb questions. Just got DishNetwork and read somwhere that it will be dead in August. You are a quite knowledgeable guy, so please let me know what my options may be after August. I keep reading about Nagra2, but I don't know what it is. Are talking about new software for Dish? If I download it, would I still have a dish? I am changing keys daily, I know, there is an autorol, but I still haven't figured out what to do with it and how to get it. Need to read more. This is an excellent forum (with some exceptions)and thank you all for being there for the ones whose areas of expertise are in the different fields. |
|
| Posted on Tuesday, April 19, 2005 - 11:20 am: |
|
I have a thread here which explains all about autoroll and where to get it and how to install it..http://forum.ecoustics.com/bbs/messages/2/132315.html
Nagra2 means Free Dishnet and Bev will be gone forever unless someone can hack it....something like hacking the P4/5 Directv cards..Bev is dead,end of April...Dishnet sometime between end of May and September...August is good guestimate at this point..
Alternatives are true FTA non coded/scrambled/encrypted channels listed on various American satellites listed at lyngsat.com...or subscribing to Dish or DTV..and U can share a sub with family/friends....there is another thread here about that too! |
|
| Posted on Tuesday, April 19, 2005 - 01:14 pm: |
|
"dlamazing is not a true poster,I believe him to be kneegrow,asking redundant dumb questions....."
IGNORE KNEEGROW......ITS THE ONLY WAY
|
|
| Posted on Tuesday, April 19, 2005 - 02:59 pm: |
|
to do autoroll do i put in x8500_245 and whait for download completed or is there more to it then that? |
|
| Posted on Tuesday, April 19, 2005 - 03:04 pm: |
|
for FTA ultra do i put in x8500_245 and whait for download to completed or is there more to it then that? |
|
| Posted on Tuesday, April 19, 2005 - 03:07 pm: |
|
THESE ARE THE NEW KEY,S 1-25-90-A0-80-8E-05-64-F5 2PM TUS 19TH <<< STOWIE<<<< |
Sexy Jenny Unregistered guest |
| Posted on Tuesday, April 19, 2005 - 03:09 pm: |
|
its down help plz missed days of our lives. |
New member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 7
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 03:48 pm: |
|
I instaled auto roll on my pansat2500a,but I didn't get any channel
and even the remote controle is freezed.
THE ONLY THING I GOT on my receiver is ON
The only thing I got on my tv.is languages.
I really need help
Thank you |
Nice Indian Unregistered guest |
| Posted on Tuesday, April 19, 2005 - 05:46 pm: |
|
Farid you need to do the following
1) pick your language that will take you to main menu
2) go to sattelite setup and choose your sattelites by right arrow
2) scan your sattelites that you chose
3) settelite scan will give you channels
4) check for latest key on this forum
5) enjoy your channels
you can ask quastions of you want to for more info.
I will help you soon as I can. |
New member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 9
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 07:27 pm: |
|
Tank you but the remote controle is completely freezed |
Nice Indian Unregistered guest |
| Posted on Tuesday, April 19, 2005 - 07:32 pm: |
|
ok..... then first microwave remote |
New member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 10
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 07:41 pm: |
|
Thank you for the joke |
Silver Member Username: Knee_grows_back
Post Number: 622
Registered: Jan-05
|
| Posted on Tuesday, April 19, 2005 - 07:47 pm: |
|
quit with the jokes pull starts...we are here to help each other out...regardless if you are retarded or not. That was a fcuking lame joke and not called for... |
Bronze Member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 11
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 07:55 pm: |
|
Then help me solve my problem
I instaled auto roll on my pansat2500a,but I didn't get any channel
and even the remote controle is freezed.
THE ONLY THING I GOT on my receiver is ON
The only thing I got on my tv.is languages
|
Silver Member Username: Knee_grows_back
Post Number: 624
Registered: Jan-05
|
| Posted on Tuesday, April 19, 2005 - 07:58 pm: |
|
reflash your fcuking reciever with the original pansat bin and restore it back to default...then try to reflash with the autoroll...that might fix your prob...if not your'e fcuked....LOL |
Bronze Member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 12
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 08:21 pm: |
|
Don't laugh at me but what do you mean by reflash |
New member Username: Sall
Post Number: 1
Registered: Apr-05
|
| Posted on Tuesday, April 19, 2005 - 10:34 pm: |
|
Can anyone out there please tell me if I change the degrees from 110 will I get more of the channels |
Deryk Vinyard Unregistered guest |
| Posted on Tuesday, April 19, 2005 - 11:02 pm: |
|
New Keys? |
dlamazing69 Unregistered guest |
| Posted on Tuesday, April 19, 2005 - 11:13 pm: |
|
am not kneewgrow am just having troble with ma dish i get good signal on 110 n 119 99% and when i scan to get channels i only get 291 i know am supoesd to get more but i dont know wats wrong and my keys are fine could it be am using a dave tripple lnb with a switch could that be the problem plz hellp am not joking (MIAMI) |
|
| Posted on Tuesday, April 19, 2005 - 11:14 pm: |
|
DISHNET KEYS Current 04-19-05:
KEY0 22 B7 05 6F C5 B2 47 4A
KEY1 25 90 A0 80 8E 05 64 F5 **Active...changed today
Always read the thread "latest and current keys"...and/or the link in the first post in that thread...I keep both of them updated ALWAYS.. |
|
| Posted on Tuesday, April 19, 2005 - 11:21 pm: |
|
Farid try changing the battries in your remote |
dlamazing69 Unregistered guest |
| Posted on Wednesday, April 20, 2005 - 01:04 am: |
|
IGNORE KNEEGROW......ITS THE ONLY WAY |
|
| Posted on Wednesday, April 20, 2005 - 02:26 am: |
|
why do u need any keys. just install autoroll files.
these are the latest firmware
X-75BL_050314_236cE_api for pansat 2300A
X-85BL_050405_246_api for pansat 2500A
X-85BL2_050330_245_api for pansat 1500A
X-87BL_050315_101_api for pansat 2700A
X-95BL_3032_2005_0405_api for pansat 5000HC
they all autoroll. you don't have to deal with entering key changes again.
download the files free here
http://www.dsscentral. n e t/cgi-bin/hubblegram/CSUpload.cgi?command=viewupload&database=files%2edb
don't register, just go to uploads section.
|
|
| Posted on Wednesday, April 20, 2005 - 03:07 pm: |
|
i think iam geting 110 channels but on echo 7? |
tracy420 Unregistered guest |
| Posted on Wednesday, April 20, 2005 - 03:27 pm: |
|
anyone got the new keys for pansat |
New member Username: Sall
Post Number: 3
Registered: Apr-05
|
| Posted on Wednesday, April 20, 2005 - 05:02 pm: |
|
Is there anyway I can get CNN or the fox news channel using the Fortec ? I get a lot of channels but can't pick up these two. Any help will be appreciated. |
|
| Posted on Wednesday, April 20, 2005 - 06:04 pm: |
|
has anyone else lost their Audlt channels?
cant get fantasy, ten, xtsy, or umtim |
|
| Posted on Wednesday, April 20, 2005 - 06:06 pm: |
|
sallie i have both
try rescaning
or power scanning |
Bronze Member Username: Maple_leaf
Post Number: 45
Registered: Apr-05
|
| Posted on Wednesday, April 20, 2005 - 06:19 pm: |
|
Like before all adult ch's went n2 you can't get them anymore. Read a little this has been posted 100 times already. |
|
| Posted on Wednesday, April 20, 2005 - 08:00 pm: |
|
anyone has the new codes?? |
hhp & thbp Unregistered guest |
| Posted on Wednesday, April 20, 2005 - 08:03 pm: |
|
anyone got new codes? |
|
| Posted on Wednesday, April 20, 2005 - 08:36 pm: |
|
gimmie the new codes please!! |
|
| Posted on Wednesday, April 20, 2005 - 08:41 pm: |
|
I need to watch the Nets game to see if they get into the playoffs.....I need some new key's peeps |
New member Username: Sall
Post Number: 4
Registered: Apr-05
|
| Posted on Wednesday, April 20, 2005 - 08:55 pm: |
|
O.K. You guys. Here it is! Let's hear a thankyou!!!
00: 89 65 F0 13
27 85 94 C7
|
hhp & thbp Unregistered guest |
| Posted on Wednesday, April 20, 2005 - 09:01 pm: |
|
thanks Sallie Malloy!!! |
|
| Posted on Wednesday, April 20, 2005 - 09:08 pm: |
|
thank you |
|
| Posted on Wednesday, April 20, 2005 - 09:45 pm: |
|
codes plzzzzzzzz |
Bronze Member Username: Maple_leaf
Post Number: 49
Registered: Apr-05
|
| Posted on Wednesday, April 20, 2005 - 09:52 pm: |
|
KEY0 89 65 F0 13 27 85 94 C7 Active
KEY1 25 90 A0 80 8E 05 64 F5
20-04-05 18:01:31
|
|
| Posted on Wednesday, April 20, 2005 - 09:52 pm: |
|
thank you Sallie Malloy i really appreciate your act of giving us the codes thank you once again and have a nice night. ron10 |
Silver Member Username: Knee_grows_back
Post Number: 628
Registered: Jan-05
|
| Posted on Wednesday, April 20, 2005 - 09:56 pm: |
|
Thanks, but no thanks retard...I have the autoroll and works like a charm...so stick your keys up your azz and quit wasting bandwidth...fcuking douch bag |
|
| Posted on Wednesday, April 20, 2005 - 10:45 pm: |
|
hey i have pansat 2500a and that code doesn't work |
Bronze Member Username: Maple_leaf
Post Number: 51
Registered: Apr-05
|
| Posted on Wednesday, April 20, 2005 - 11:43 pm: |
|
Learn how to use it and it will. |
|
| Posted on Thursday, April 21, 2005 - 09:41 am: |
|
SO WHAT HAPPENED VAG 2 ON APR.20 FOR EX-VU ANYBODY HEARD.MAYBE NOT GOING TO HAPPEN. |
Bronze Member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 13
Registered: Apr-05
|
| Posted on Thursday, April 21, 2005 - 06:53 pm: |
|
any one knows what is LNB local frequency |
Bronze Member Username: Faridali2
St Leonard,
Qc
Canada
Post Number: 14
Registered: Apr-05
| |
