| Author |
Thread: What is the ultimate setup |
    
New member Username: In4ni
Post Number: 1
Registered: Feb-05
|
| Posted on Saturday, February 19, 2005 - 09:19 pm: |
|
Getting ready to make my first FTA purchase.
What is the ultimate hardware setup to be able to receive maxinum channels. how bout a dish500 and a 30" with with a motor? Will that combo work?
thank you |
|
|
|
New member Username: Wyrtwister
Post Number: 5
Registered: Feb-05
|
| Posted on Sunday, February 20, 2005 - 12:22 am: |
|
Two ways to go . Put a DVB-S PCI sat card in your computer or buy a FTA receiver ( Pansat 2500A or a Fortec Ultra ) .
If you are using a motor , there is no need for a twin LNB .
If you want true FTA , you need at least the 30" dish & a linear Ku LNB .
If you want to " test " DN & BEV , put an old 18" DTV dish & LNB on the motor .
If you want both , strap a DTV LNB to the side of the 30" dish & linear KU LNB . Use a Diesque swirch .
Wyr |
|
| Posted on Sunday, February 20, 2005 - 07:51 am: |
|
I'm hearing very good things about the coolsat over the pansat...Much faster and EPG working very soon..many I know have both...all prefer the coolsat |
working EPG Unregistered guest |
| Posted on Sunday, February 20, 2005 - 05:37 pm: |
|
Coolsat 4000 has a working EPG
http://www.gosatellite.net/coolsat_4000_plus_1579_ctg.htm
|
New member Username: In4ni
Post Number: 2
Registered: Feb-05
|
| Posted on Sunday, February 20, 2005 - 07:10 pm: |
|
Sure is amazing how off subject these threads get |
|
| Posted on Sunday, February 20, 2005 - 07:40 pm: |
|
Actually this thread is Exactly on subject,unlike most other threads.. |
New member Username: Wyrtwister
Post Number: 6
Registered: Feb-05
|
| Posted on Tuesday, February 22, 2005 - 09:58 am: |
|
Is the EPG on the CoolSAt on DN or BEV ?
What is the coast of this IRD ?
Does it use Pansat or Fortec flashes ?
Thanks ,
Wyr |
|
| Posted on Tuesday, February 22, 2005 - 10:03 am: |
|
has its own software...prices vary based upon dealer..220-280...EPG software release this week.. |
|
| Posted on Tuesday, February 22, 2005 - 10:57 am: |
|
Wyr wait for the new model release Coolsat PRO march 1'st it's much better and a supposed epg release on Saturday. weel see... |
Bronze Member Username: Allic
Post Number: 13
Registered: Jan-05
|
| Posted on Monday, March 07, 2005 - 10:45 pm: |
|
A fortec with multi dish is the best!
We have the best deals on the Fortec |
JayBeeZee Unregistered guest |
| Posted on Saturday, March 19, 2005 - 07:53 pm: |
|
can anyone tell me if the coolsat 4000 pro can receive bev.... ty |
|
| Posted on Saturday, March 19, 2005 - 08:56 pm: |
|
Bev/bell has NOT changed Keys since November 2003....and I have posted those keys here at numerous places..also KEY changes APPLY to ANY FTA receiver...all the same,make-model makes no difference
Current BEV/ Bell Keys
AUX0 is active, changed Tue Nov 18 20:00:00 2003
AUX0: 82 D7 51 E4 5B 97 9D 81
AUX1: 65 57 46 14 36 02 D8 DA
The Dishnetwork Keys work on ALL makes/models of FTA receivers...Pansat..Fortec etc..
Current Dish Keys
KEY1 is active, changed Thu Mar 17 17:00:00 2005
KEY0: F0 C9 59 D8 7F 8D 34 13
KEY1: 0B 51 9E B7 EB 20 E7 4D
BTW...here's where/how to get and use BOTH the Pansat 2500 and 2700 autoroll bin v245,which does work..its in this linked thread below..READ!
http://forum.ecoustics.com/bbs/messages/2/127878.html
If missing channels after a Key change install,..always shut power OFF on BACK of receiver,unplug,wait 1 minute,plug ,turn back ON..if that doesn't fix it,then do a AUTOSCAN (or can add new channel list using Gtools 1.86) via the remote in your installation setup again. |
JayBeeZee Unregistered guest |
| Posted on Saturday, March 19, 2005 - 09:08 pm: |
|
i have a coolsat 4000 pro and when i look in my list of satellites it only has two both dish net sats but not bev how do i get more sat choices on that list
ty again |
