| Author |
Thread: Please help ... I am so desperate. |
    
New member Username: Cr1ts1t
Post Number: 1
Registered: Feb-05
|
| Posted on Saturday, February 05, 2005 - 12:22 pm: |
|
We recently brought a Pansat 25000a but could not figure out how to make it work. What is LNB and how do I know which one I have. What LNB Local-Freq number I need to use? And what Satellite name(s) I need to choose? I was told by a friend of mine to choose Nimiq2/Ku, a name for the Satellite list but we still got no signal.
We put up our disc facing Southern sky and we got our Quality up to 99% but still nothing showing up. Below is our current Settings.
Satellite: Nimiq2/Ku
LNB type: Standard
LNB Local-Freq. 11250
22kHz: OFF
DiSeqC: OFF
Skew: -45
TP: [1] 12223 V 20.0000
Positioner Setting: Disable
Satellite Scan: ALL |
|
|
|
pansat1968 Unregistered guest |
| Posted on Saturday, February 05, 2005 - 06:37 pm: |
|
Your fucked ... |
|
| Posted on Saturday, February 05, 2005 - 07:46 pm: |
|
Forget Nimiq 2. Depending on where you live, your best and easiest bet is echo sats - 110; the 110 satellite is over the equator at 110 degrees West longitude |
Full of s*&t Unregistered guest |
| Posted on Saturday, February 05, 2005 - 07:55 pm: |
|
this guy has a skew of -45,you dont need that,You need to go to dss centrel or better yet al7bar.ca or tk...AND READ>>> |
Full of s*&t Unregistered guest |
| Posted on Saturday, February 05, 2005 - 07:56 pm: |
|
this guy has a skew of -45,you dont need that,You need to go to dss centrel or better yet al7bar.ca or tk...AND READ>>> |
|
