Home > Message Board > Home Audio > Speakers > Archive through April 05, 2005 > Timbre-match or dB match??????
Main Topics Main Topics   Your Account Your Account Search Search   Help/Instructions Help
Today's Posts Today's Posts | Last 3 Days Bookmark and Share
Author Thread: Timbre-match or dB match??????
Top of pagePrevious messageNext messageBottom of page Link to this message

New member
Username: Aogemini

Pasco, Washington
Usa

Post Number: 8
Registered: Mar-05
Edit Post

When finding the appropriate center channel to complement the front channel speakers, should I choose a center channel that mirrors the dB level (sensitivity) or the timbre-level (frequency range), assuming that both speakers are the same brand?

For example, should I chose Axiom's VP-100 or VP-150 center channel to match the M60 front channel speakers?

Please advise.

Thanks,
Art Ortega
Top of pagePrevious messageNext messageBottom of page Link to this message

Bronze Member
Username: Artk

Albany, Oregon
USA

Post Number: 80
Registered: Feb-05
Edit Post

I have been reading that the VP150 is too bright for some folks. I matched the drivers with my center to my mains. Paradigm CC370 with my Monitor 5's. Timbre match is more important than sensitivity match as you can adjust the volume level of any given channel. Perhaps you might try the VP100 and if it does not give you what you need you can always sent it back and get the VP150. If it weren't for the 2 tweeters I would have suggested the VP150 without hesitation as there appears to be a good driver match which bodes well for integration. Good luck.
Top of pagePrevious messageNext messageBottom of page Link to this message

New member
Username: Blasterman

Post Number: 9
Registered: Mar-05
Edit Post

Like Arthur said - match the drivers when at all possible.

I prefer large center channels or splitting the center and or using a dual center. But...two tweeters and 3 mids doesn't seem like it would be balanced without padding down the tweeters which may account for some of the complaints on brightness, but I haven't heard the 150.
Top of pagePrevious messageNext messageBottom of page Link to this message

Gold Member
Username: Project6

Post Number: 2849
Registered: Dec-03
Edit Post

Either center channel will be perfect for the M60 and as Arthur Kyle pointed out, it is good to timbre match the front speakers. You don't want that "gap" in the whole surround set up. Or you could try what other folks have done. Do away with a center channel and go with a "phantom" center, i.e., use the effect of the front mains to provide the dialogue. I haven't tried this set-up but it has been discussed in this forum.

cheers
Top of pagePrevious messageNext messageBottom of page Link to this message

Silver Member
Username: Paul_ohstbucks

Post Number: 433
Registered: Jan-05
Edit Post

Well said Berny & Arthur.....

With all things being equal, I'd buy the larger center channel speaker first if added price isnt an issue. Either will timber match nicely, and volume isnt of a concern because you can adjust individual channel levels.

Topics | Last Day | Search | Formatting Tips | Terms | Rules | Help | Log out | Bookmark and Share
Home > Message Board > Home Audio > Speakers > Archive through April 05, 2005 > Timbre-match or dB match?????? [ « Previous ] [ Next » ]